TF1260 appears on my doormat
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
TF1260 appears on my doormat
These have arrived...
No way I’ll get to build them this year but I might eventually give in and try them. Especially reading how much hell @alenppc has had with the connectors. Would probably be an alenppc/superduper only license at this point.
No way I’ll get to build them this year but I might eventually give in and try them. Especially reading how much hell @alenppc has had with the connectors. Would probably be an alenppc/superduper only license at this point.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1260 appears on my doormat
Beautiful!, looks like a worthy compliment for a well travelled, heavily taxed A1200 expansion connector!
Out of interest, what were the main challenges in adapting the CD32 360 design to the 1200 from a logic point of view?
Out of interest, what were the main challenges in adapting the CD32 360 design to the 1200 from a logic point of view?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 appears on my doormat
I've no idea. I've not figured it out/done it yet.
I guess this is the bit people dont get. Making the board is kinda easy. Making it work is hard and takes time. There are literally thousands of hours people dont see that i have put into these boards. And thats why when people start shouting at me demanding shit i tell them to f*ck off.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1260 appears on my doormat
They look awesome!!
Will you sell the boards bare/empty?
I'd frame it and put it on the wall!!
bg
Will you sell the boards bare/empty?
I'd frame it and put it on the wall!!
bg
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TF1260 appears on my doormat
May I ask how long would you estimate time spent on TF330 or TF360?terriblefire wrote: ↑Wed Nov 27, 2019 7:21 pmI've no idea. I've not figured it out/done it yet.
I guess this is the bit people dont get. Making the board is kinda easy. Making it work is hard and takes time. There are literally thousands of hours people dont see that i have put into these boards. And thats why when people start shouting at me demanding shit i tell them to f*ck off.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TF1260 appears on my doormat
In general A1200 cards are quite pretty.
Edu board based on tf330 visually look great as well.
Edu board based on tf330 visually look great as well.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
Re: TF1260 appears on my doormat
I suppose I was just under the impression that board layout / component choice / signal selection went hand in hand with the firmware development and that once you got to the point of actually ordering a PCB 90% of that work must have already been done.
Thinking about it further it makes sense that until you have a built prototype PCB to test then there's only so much you can do and that a lot of tuning work remains.
Re: TF1260 appears on my doormat
Where did this come from? I wasn't even aware that it existed.arkadiusz.makarenko wrote: ↑Wed Nov 27, 2019 8:03 pm In general A1200 cards are quite pretty.
Edu board based on tf330 visually look great as well.
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TF1260 appears on my doormat
Twitter.go0se wrote: ↑Wed Nov 27, 2019 8:15 pmWhere did this come from? I wasn't even aware that it existed.arkadiusz.makarenko wrote: ↑Wed Nov 27, 2019 8:03 pm In general A1200 cards are quite pretty.
Edu board based on tf330 visually look great as well.
This was prototype.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem