Module ESP8266 without TF on Amiga
Moderators: terriblefire, Terriblefire Moderator
Re: Module ESP8266 without TF on Amiga
I setup for 9600 ping from linux go but from amiga no
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
Edit the install_script, replace the 115200 (or 38400 if you've edited it already) to 9600 and rerun the script. Then reboot the amiga. If you still have issues after that its your hardware thats the issue.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
exactly i done thisEdit the install_script, replace the 115200 (or 38400 if you've edited it already) to 9600 and rerun the script.
when it comes to the adapter on the DB9 side we connect Amiga yes?
In your picture (on page 2) it is not clear but it looks to me like you have TX pin 2 -> TX pin 2 and RX pin 3 to RX pin 3 on your DB25<>DB9 connection, but you need to cross them over - TX to RX and RX to TX.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
Can you please verify your hardware works by talking to raspberry pi serial port GPIO or something similar.
In general this thread is looking like a technical support disaster and is going to get cleaned up or removed soon.
@kulamario Everyone on the forum is more than happy to help but this is your project you've wandered off the well beaten path and you need to own it.
In general this thread is looking like a technical support disaster and is going to get cleaned up or removed soon.
@kulamario Everyone on the forum is more than happy to help but this is your project you've wandered off the well beaten path and you need to own it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
No have raspberry I have only arduino but I check today this converter
I connect to one side usb to rs232 converter on second side I short tx to rx in terminal I have communication
So I think this converter work fine
Next what I think maybe burn diagrom and check serial port in amiga ?
I hope is not broken
I connect to one side usb to rs232 converter on second side I short tx to rx in terminal I have communication
So I think this converter work fine
Next what I think maybe burn diagrom and check serial port in amiga ?
I hope is not broken
Re: Module ESP8266 without TF on Amiga
You can download and use AmigaTestKit, and build a serial dongle to test it. Same dongle DiagROM uses.
Re: Module ESP8266 without TF on Amiga
I check this on putty I have something
And amiga test kit show like is something wrong I think
And amiga test kit show like is something wrong I think
Re: Module ESP8266 without TF on Amiga
No just connect to PC via RS232 to usb