Hi all,
I got two TF536 PCB and I want to start building them. Now is there a how-to including the items we will need to solder on the PCB?
Also, is there any way to make a TF536 to work on a MegaSTE (not talking about TTs I am not sure if the 18MHz gain is worth the trouble and the risk)?
Two questions -not Amiga, just TF536 and Atari :)
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 80
- Joined: Wed Aug 19, 2020 12:56 pm
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Two questions -not Amiga, just TF536 and Atari :)
There is no how to. There is a BOM topic on the site that lists the parts you need.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Posts: 80
- Joined: Wed Aug 19, 2020 12:56 pm
Re: Two questions -not Amiga, just TF536 and Atari :)
Found the BOM, thanks.terriblefire wrote: ↑Thu Oct 29, 2020 10:35 am There is no how to. There is a BOM topic on the site that lists the parts you need.
Here it is, for future reference: https://www.exxosforum.co.uk/forum/viewt ... =76&t=3035
As for my second question, could this fit to an STE or MegaSTE with a CPU re-locator or an adapter for the different CPU?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Two questions -not Amiga, just TF536 and Atari :)
Nobody knows. You'd need to try it and make an adaptor. Its a significant project and it didnt work very well in the Amiga 600 IIRC.MegaSTEarian wrote: ↑Thu Oct 29, 2020 10:53 am As for my second question, could this fit to an STE or MegaSTE with a CPU re-locator or an adapter for the different CPU?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Posts: 80
- Joined: Wed Aug 19, 2020 12:56 pm