Thanks again Terriblefire for open sourcing your awesome designs.
I'm looking forward to building this one! May I post progress and questions here?
Thanks!
Sety's TF530 build
Moderators: terriblefire, Terriblefire Moderator
Sety's TF530 build
- Attachments
-
- TF530.jpg (291.96 KiB) Viewed 4973 times
Re: My TF530 build
As sety says thanks for the design and utube video Terriblefire.
[quote]
Thank you for your demonstration of soldering the cpld's with an iron and drag soldering. I guess your video has me leaning toward soldering with the iron. I also have a version 3 530. If anyone has an recomendation on soldering the cpld's and other smt components please advise.
[quote]
Thank you for your demonstration of soldering the cpld's with an iron and drag soldering. I guess your video has me leaning toward soldering with the iron. I also have a version 3 530. If anyone has an recomendation on soldering the cpld's and other smt components please advise.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: My TF530 build
I literally did a video on the CPLDs and RNs this week
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Sety's TF530 build
Does anyone have a part number for the 530 osc? Or where to get one?
Thanks
Thanks
Re: Sety's TF530 build
I got mine from farnell, sorry no part no. Just on the train to Scotland.
If it ain't broke, test it to Destruction.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Sety's TF530 build
I think everyone uses different crystals. I think they’re 7.5mm x 3.5mm 3.3V. 4 pad.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Sety's TF530 build
Thanks TF, found in on mouser via google. When you search mouser using their search it didn't show up.
Re: Sety's TF530 build
Placed order today for parts with some extra's. Everything from mouser except cpld's which I had to get from digikey. Note that sips from digikey are extra and mouser has some xtra parts.
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Sety's TF530 build
They are not giving it away. But then again who wants to use some cheap substitute that gives ya trouble....