Subzero79's build
Moderators: terriblefire, Terriblefire Moderator
Re: Subzero79's build
Sounds like bad / loose connections on the relocator.
If it ain't broke, test it to Destruction.
Re: Subzero79's build
All pins soldered
If i use ide boots with 0 mb fast
If no ide atached and boot from floppy 2 mb memory
If i use ide boots with 0 mb fast
If no ide atached and boot from floppy 2 mb memory
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Subzero79's build
Check ide cable length, should be approx 10cm
this usually happens when ide cable is too long
this usually happens when ide cable is too long
Retro computer hardware & repair in Germany
Re: Subzero79's build
Ok cut ide cable to 2cm and is beter
Sometimes lose fast ram. Un 5;to 6 times is ok
Sometimes lose fast ram. Un 5;to 6 times is ok
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Subzero79's build
at the moment You don't have FastRAM - Your speed is also like stock 7Mhz CPU,
it's because IDE isn't buffered, try to avoid long ide cables
it's because IDE isn't buffered, try to avoid long ide cables
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5387
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Subzero79's build
Or buy an IDE buffer. Possibly i should make a cheap buffer design available so people can use one if they need.8 Bit Dreams wrote: ↑Mon Feb 17, 2020 7:14 pm at the moment You don't have FastRAM - Your speed is also like stock 7Mhz CPU,
it's because IDE isn't buffered, try to avoid long ide cables
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."