Maybe You should start with TF520
it's (almost) running (except CD Drive)
My CDTV Nightmare
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF534 on CDTV
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF534 on CDTV
I did. The 534 booted DiagROM. 520 didn’t
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF534 on CDTV
Sorry if this is too obvious, but have you upgraded CDTV's Extended roms and kickstart? To get it work with kickstart 3.1 extended roms needed to upgraded. This is essential even with original SCSI solution. Kickstart 3.1 makes life with CDTV so much easier.
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF534 on CDTV
Nope. Was in the process of figuring out what roms I need
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF534 on CDTV
A500's kickstart 3.1 is correct one. There is two newer versions of extended roms. CDTV Extended-ROM v2.3 (1992) and CDTV Extended-ROM v2.7 (1992) only known difference is that latter one get screen tinted red, if there is no disk drive connected to CDTV. Both do, I have v2.3 extended roms and kickstart 3.1
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF534 on CDTV
Thanks.utri007 wrote: ↑Mon Jan 07, 2019 9:29 pm A500's kickstart 3.1 is correct one. There is two newer versions of extended roms. CDTV Extended-ROM v2.3 (1992) and CDTV Extended-ROM v2.7 (1992) only known difference is that latter one get screen tinted red, if there is no disk drive connected to CDTV. Both do, I have v2.3 extended roms and kickstart 3.1
I meant the physical roms. I think they're 27C1001s but there are variants of the pin-out allegedly.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF534 on CDTV
It lives once more.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF534 on CDTV
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF534 on CDTV
That's great!!
i assume card is running nice, but IDE isn't booting, also CD Drive isn't working..
Was thinking about to patch extended roms with remus, or something what can change CD Drive boot priority from 0 to 1 or 2..
that will help us a lot, in other hand this will not let CD Drive to work
i assume card is running nice, but IDE isn't booting, also CD Drive isn't working..
Was thinking about to patch extended roms with remus, or something what can change CD Drive boot priority from 0 to 1 or 2..
that will help us a lot, in other hand this will not let CD Drive to work
Retro computer hardware & repair in Germany