Stumbled on Spidi's CDTV card:
http://eab.abime.net/showthread.php?t=95073
Seems he was able to solve DMAC problem, both, ide and CDROM are working! Awesome news, that gives me hope to see TF534 tunning on CDTV one day...
My CDTV Nightmare
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: My CDTV Nightmare
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: My CDTV Nightmare
Its more likely to be a 536.. The 534 is not getting touched again.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: My CDTV Nightmare
Shame his stuff is closed source and you can't build one yourself, and that he doesn't share any info back to the community
That board also doesn't have a CPU and is CDTV specific, so there could be some cheats involved that a more general accelerator (proper) couldn't get away with.
I'll see if I can do some testing on the weekend with my TF534+A570 - I think the answer is close!
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: My CDTV Nightmare
The DMAC stuff will all be bus grant related. Similar to the Atari ST
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."