Something's wrong with that one, the archive is empty.terriblefire wrote: ↑Mon Feb 18, 2019 8:57 am Did you grab the firmware I stuck in the repo over the weekend?
Latest TF534 is here
Moderators: terriblefire, Terriblefire Moderator
Re: Latest TF534 is here
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
Will sort later... mad busy with kids so might have missed something
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok new firmware pushed.. Its a combined pack for all boards.
https://github.com/terriblefire/terribl ... _alpha.zip
https://github.com/terriblefire/terribl ... _alpha.zip
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
@alenppc i noticed a regression with my IDE code on the TF534... must have been when i was trying to figure out my cable issues. I've emailed you a new version. Let me know how you get on and i'll push to the repo.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Latest TF534 is here
Spotted a small bug on the 534 rev2c, the only one so far.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
What’s the bug.. difficult to tell from the screenshot
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Latest TF534 is here
The Early Startup Menu pretty much crashes the machine (the buttons are not displayed) and crash if you click in their place.
This is at 36 MHz. I have not encountered any other issues so far.
This is at 36 MHz. I have not encountered any other issues so far.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
I’ve seen this before. Thought it was cache related. :/
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Latest TF534 is here
I don't think this is cache, it's something else. I don't think 2b had it, but I can double check.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
There are no changes between the two that could account for this. Very odd..
EDIT: Sum total of changes are a pull up on BG20, rewired 5 missing address pins to the unused pins on the RAMCPLD and I removed an earth trace that was on the bottom layer so that I could give more space to grounding to the ground plane.
This can’t account for a major behaviour change.
EDIT: Sum total of changes are a pull up on BG20, rewired 5 missing address pins to the unused pins on the RAMCPLD and I removed an earth trace that was on the bottom layer so that I could give more space to grounding to the ground plane.
This can’t account for a major behaviour change.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."