Got my boards earlyer today, for UK->NL, it seems the whole Brexit deal is slowing down the postal system already, normally it is about 3 -4 days.
All boards were in mint condition
Now to get some (really small) parts.
Latest TF534 is here
Moderators: terriblefire, Terriblefire Moderator
Re: Latest TF534 is here
Expressing interest in two. PM sent.
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Latest TF534 is here
Ok, started to take preorders on ready built TF534 cards
http://www.amibay.com/showthread.php?10 ... phen-leary
Steve will need 10x TF534 PCB's from You
http://www.amibay.com/showthread.php?10 ... phen-leary
Steve will need 10x TF534 PCB's from You
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
I don’t have any. I’ll need to order more. Will be placing an order this week. Was too busy at the weekend what with the TF330 fix and getting a new laptop
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Latest TF534 is here
oh, that's a pity...please do it..terriblefire wrote: ↑Mon Mar 18, 2019 8:47 am I don’t have any. I’ll need to order more. Will be placing an order this week. Was too busy at the weekend what with the TF330 fix and getting a new laptop
Have built PCB's i got and can confirm rev.2c is working flawlessly. Just one question about IDE:
still getting 1,5MB/s after CPU FASTROM command - why so? It was 7,5MB/ on previous rev's...
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
Im getting the faster speeds... Do you have an MMU CPU installed??
S
S
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Latest TF534 is here
Nope, its a standard 68EC030RP40B..
Will try 33 MMU one
EDIT
Oh yeah!
Installed MC68030RP33B - CPU FASTROM gives - 6,8MB/s - Nice!
Will try 33 MMU one
EDIT
Oh yeah!
Installed MC68030RP33B - CPU FASTROM gives - 6,8MB/s - Nice!
Retro computer hardware & repair in Germany
Re: Latest TF534 is here
Hi 8 Bit Dreams,
Seeing as you've just built a 534 could you confirm the value of the mystery C31? I assume it's another 10uf 1206 but would like to be sure!
Cheers.
Seeing as you've just built a 534 could you confirm the value of the mystery C31? I assume it's another 10uf 1206 but would like to be sure!
Cheers.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
updated the BOM. C31 is actually not required but i spec'd it as 10uF
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Latest TF534 is here
confirming C31 as 10µF is working just fine
Retro computer hardware & repair in Germany