Latest TF534 is here

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

Post Reply
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: Latest TF534 is here

Post by alenppc »

terriblefire wrote: Mon Feb 18, 2019 8:57 am Did you grab the firmware I stuck in the repo over the weekend?
Something's wrong with that one, the archive is empty.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

Will sort later... mad busy with kids so might have missed something
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

Ok new firmware pushed.. Its a combined pack for all boards.

https://github.com/terriblefire/terribl ... _alpha.zip
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

@alenppc i noticed a regression with my IDE code on the TF534... must have been when i was trying to figure out my cable issues. I've emailed you a new version. Let me know how you get on and i'll push to the repo.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: Latest TF534 is here

Post by alenppc »

Spotted a small bug on the 534 rev2c, the only one so far.
534.jpg
534.jpg (18.84 KiB) Viewed 3420 times
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

What’s the bug.. difficult to tell from the screenshot
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: Latest TF534 is here

Post by alenppc »

The Early Startup Menu pretty much crashes the machine (the buttons are not displayed) and crash if you click in their place.

This is at 36 MHz. I have not encountered any other issues so far.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

I’ve seen this before. Thought it was cache related. :/
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: Latest TF534 is here

Post by alenppc »

I don't think this is cache, it's something else. I don't think 2b had it, but I can double check.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

There are no changes between the two that could account for this. Very odd..

EDIT: Sum total of changes are a pull up on BG20, rewired 5 missing address pins to the unused pins on the RAMCPLD and I removed an earth trace that was on the bottom layer so that I could give more space to grounding to the ground plane.

This can’t account for a major behaviour change.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF534 (OBSOLETE)”