Page 8 of 15
Re: kludge’s TF534 build
Posted: Thu Mar 28, 2019 2:52 pm
by terriblefire
I just added an open board view file for the TF534 to the github page.
https://github.com/terriblefire/tf534
- Screenshot 2019-03-28 at 14.49.58.png (113.85 KiB) Viewed 3861 times
Note by default it opens on the bottom of the board.
Re: kludge’s TF534 build
Posted: Thu Mar 28, 2019 3:16 pm
by kludge
terriblefire wrote: ↑Thu Mar 28, 2019 2:52 pm
I just added an open board view file for the TF534 to the github page.
Nice! Thank you!
Got this today. Might also help. Maybe.
- 42447D7A-7159-4352-9BE0-0A6ABE857587.jpeg (198.1 KiB) Viewed 3860 times
Re: kludge’s TF534 build
Posted: Thu Mar 28, 2019 10:08 pm
by kludge
Beeped my way throug the CPLDs, RAM, buffers and resistor networks, and can’t find any shorts.
Next I will try to work my way through OBV to see if somethings not connected right. But that’s for another day.
Re: kludge’s TF534 build
Posted: Fri Mar 29, 2019 7:57 am
by terriblefire
try this firmware
https://www.dropbox.com/s/icxg3d8a2rbov ... g.zip?dl=0
I havent tested it but it should make the TF534 think the RAM is already configured so the OS will not try to allocate it to the system pool.
Then you should be able to diagnose if the issue is IDE or not... and finally use
http://aminet.net/package/util/cli/AddMem
do
ADDMEM START 40000000 TO 40400000 PRI -100
this will make the fastram low priority and not get code run in there . You should then be able to load systest from a cli.
Re: kludge’s TF534 build
Posted: Fri Mar 29, 2019 9:04 am
by kludge
Perfect, thanks! The wife will have to do without my company in front of the TV tonight as well
Re: kludge’s TF534 build
Posted: Fri Mar 29, 2019 8:43 pm
by kludge
kludge wrote: ↑Fri Mar 29, 2019 9:04 am
Perfect, thanks! The wife will have to do without my company in front of the TV tonight as well
That didn't work out as planned. Wish me luck tomorrow!
Re: kludge’s TF534 build
Posted: Fri Mar 29, 2019 10:01 pm
by Justme14
terriblefire wrote: ↑Fri Mar 29, 2019 7:57 am
try this firmware
https://www.dropbox.com/s/icxg3d8a2rbov ... g.zip?dl=0
I havent tested it but it should make the TF534 think the RAM is already configured so the OS will not try to allocate it to the system pool.
Then you should be able to diagnose if the issue is IDE or not... and finally use
http://aminet.net/package/util/cli/AddMem
do
ADDMEM START 40000000 TO 40400000 PRI -100
this will make the fastram low priority and not get code run in there . You should then be able to load systest from a cli.
Hi TF,
This firmware now works for me 3.1 boots with IDE , no issues
Next step with addmem START 40000000 TO 40400000 PRI -100, @ the moment I press enter ,and gives a softwarefailuer and reboots.
Will try to resolder/reflow all the ram chips..
Thanks a lot for this nonautoconfig firmware ...,Very helpfull
Re: kludge’s TF534 build
Posted: Fri Mar 29, 2019 10:02 pm
by terriblefire
No Problem,
I sometimes forget that I do this alot when bring up boards... hack firmwares to give me info.
Re: kludge’s TF534 build
Posted: Fri Mar 29, 2019 10:14 pm
by Justme14
kludge wrote: ↑Thu Mar 28, 2019 3:16 pm
terriblefire wrote: ↑Thu Mar 28, 2019 2:52 pm
I just added an open board view file for the TF534 to the github page.
Nice! Thank you!
Got this today. Might also help. Maybe.
42447D7A-7159-4352-9BE0-0A6ABE857587.jpeg
Nice Station you have there,seems you have big plans ahead
!
Re: kludge’s TF534 build
Posted: Sat Mar 30, 2019 8:54 am
by kludge
Justme14 wrote: ↑Fri Mar 29, 2019 10:14 pm
Nice Station you have there,seems you have big plans ahead
!
I needed a hot air station and thought that I could use an extra soldering station as well, so I bought a combo
