Please DONT report TF534 Issues here

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

dalek
Posts: 48
Joined: Thu Nov 08, 2018 11:03 am

Re: Please report TF534 Issues here

Post by dalek » Sun Jul 07, 2019 5:53 am

kludge wrote:
Tue Jul 02, 2019 1:00 pm
That’s very interesting. Just came here to post images of my adapters (before seeing the video), and mine are exactly the same. The one with the transistors does work in my A600, but not connected to the 534.
...
I have the V.H2 version of the adaptor and in sysinfo, on my first 100MB partition I get a really slow 700kb/sec. On the second ~3.4GB partition it's glitchy and returns immediately with values between 1.5MB/sec and >10MB/sec (impossible). Tried a few different CF cards too. Though drive access seems fine (but a bit slow to boot).

Going to try with a IDE2SD adaptor when I get a chance. Anyone else have this issue?

EDIT: this is _with_ mufastrom/mmulib

dalek
Posts: 48
Joined: Thu Nov 08, 2018 11:03 am

Re: Please report TF534 Issues here

Post by dalek » Mon Jul 08, 2019 4:40 am

So with the IDE2SD adaptor (specifically this) and a 4GB SD card, I get a consistent 2.1MB/sec with both partitions without fastrom. With fastrom, ~5MB/sec (and no dodgy overflows in sysinfo).

So something funky with either the V.H2 adaptor or my all of my CF cards.

EzdineG
Posts: 22
Joined: Mon Nov 12, 2018 5:19 pm

Re: Please report TF534 Issues here

Post by EzdineG » Mon Jul 08, 2019 1:47 pm

Interesting, and thanks for sharing your findings.

I have two configurations, one with ide2sd and the other with the CF adapter you’re referring to. I didn’t realize it but I can confirm they behave just as you’ve discovered.

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 408
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: Please report TF534 Issues here

Post by 8 Bit Dreams » Mon Jul 08, 2019 2:24 pm

dalek wrote:
Sun Jul 07, 2019 5:53 am
I have the V.H2 version of the adaptor and in sysinfo, on my first 100MB partition I get a really slow 700kb/sec. On the second ~3.4GB partition it's glitchy and returns immediately with values between 1.5MB/sec and >10MB/sec (impossible). Tried a few different CF cards too. Though drive access seems fine (but a bit slow to boot).

Going to try with a IDE2SD adaptor when I get a chance. Anyone else have this issue?

EDIT: this is _with_ mufastrom/mmulib
Yes!!!!
this is the same sh*t i am talking all the time! I was thinking im going crazy...
EzdineG wrote:
Mon Jul 08, 2019 1:47 pm

I have two configurations, one with ide2sd and the other with the CF adapter you’re referring to. I didn’t realize it but I can confirm they behave just as you’ve discovered.
Both, or V.H2 only???
Retro computer repair & hardware in Germany

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 408
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: Please report TF534 Issues here

Post by 8 Bit Dreams » Tue Jul 09, 2019 12:39 am

Ok,
Tried with SD to IDE adapter - muFASTROM works now, however it shows lower speed for first partition..
Retro computer repair & hardware in Germany

User avatar
kludge
Posts: 335
Joined: Thu Nov 08, 2018 2:05 pm
Location: Sweden
Contact:

Re: Please report TF534 Issues here

Post by kludge » Sun Jul 14, 2019 11:07 pm

kludge wrote:
Fri Jul 05, 2019 10:15 am
terriblefire wrote:
Wed Jul 03, 2019 7:52 pm
You know I roll a dice to decide the cap values right?
OMG. I need to design such a die.
Some CAD'ing later... I'll have to make some of these...

Diecoupling_2019-Jul-14_10-03-18PM-000_CustomizedView24057239428.png
Diecoupling_2019-Jul-14_10-03-18PM-000_CustomizedView24057239428.png (70.92 KiB) Viewed 1390 times
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 3 * Amiga 500 ][ Amiga 500+ ][ Amiga 600HD ][ Amiga 2000 ][ Amiga 4000/030 w/ 64 MB RAM hack ][ CD32 (NTSC) ][ VIC-20 ][ 4 * C64 Breadbin ][ 2 * C64C ][ 2 * C128 ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]

terriblefire
Moderator Team
Moderator Team
Posts: 1399
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Please Don't report TF534 Issues here

Post by terriblefire » Wed Aug 14, 2019 6:19 pm

I've cleaned up this topic and banned Madk71.

This nonsense has eaten 30 mins out of my 90 mins per evening.

If you dont like what I am building please dont buy it. I dont care if you dont like it or are disappointed with it.
———
I get cranky when asked to repeat myself.

Locked

Return to “TF534 (OBSOLETE)”