Arek's TF534 build

Post by **terriblefire** » Tue Sep 17, 2019 4:12 pm

arkadiusz.makarenko wrote: ↑Tue Sep 17, 2019 2:57 pm Yup. Works all right on orginal CPU.

What you’re seeing sounds like you have the clock jumper on the wrong setting?

Post by **arkadiusz.makarenko** » Tue Sep 17, 2019 4:19 pm

I got it set up wrong!
I don't get any output at all on other setting.

Post by **arkadiusz.makarenko** » Tue Sep 17, 2019 6:00 pm

Ok. Ordered CPU and 33 MHz oscillator. I hope this will solve my mystery.

PaulJ_2.0 · Post by **PaulJ_2.0** » Tue Sep 17, 2019 6:38 pm

Maybe post a clear pic of your board, maybe one of us can spot something amiss?

Post by **arkadiusz.makarenko** » Tue Sep 17, 2019 7:21 pm

It starts at 7mhz but doesn't at 40mhz.

CPU is unknown, so I assume it may be bad. I will get tested CPU in 2 days, and 33mhz oscillator.

Post by **arkadiusz.makarenko** » Tue Sep 17, 2019 7:55 pm

Yeyeyyeyeye!! Got it boot Diagrom. It was fu*king oscillator. It runs at 50mhz!

Post by **PhilC** » Tue Sep 17, 2019 8:08 pm

arkadiusz.makarenko wrote: ↑Tue Sep 17, 2019 7:55 pm Yeyeyyeyeye!! Got it boot Diagrom. It was fu*king oscillator. It runs at 50mhz!

Well done.

Dodgy oscillator choice or just a duff one?

Post by **arkadiusz.makarenko** » Tue Sep 17, 2019 8:16 pm

PhilC wrote: ↑Tue Sep 17, 2019 8:08 pm
arkadiusz.makarenko wrote: ↑Tue Sep 17, 2019 7:55 pm Yeyeyyeyeye!! Got it boot Diagrom. It was fu*king oscillator. It runs at 50mhz!
Well done.

Dodgy oscillator choice or just a duff one?

Genuine source. I had to kill it somehow.

Post by **PhilC** » Tue Sep 17, 2019 8:23 pm

At least it's fixed and 50mhz at that, well done.

Post by **arkadiusz.makarenko** » Tue Sep 17, 2019 8:30 pm

It appears that there is still ram issue but this can be sorted.

Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build

Re: Arek's TF534 build