Noob building a TF534

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

Post Reply
Lynxman
Posts: 89
Joined: Sun Nov 24, 2019 8:09 pm

Noob building a TF534

Post by Lynxman » Tue Dec 03, 2019 7:26 pm

I just finished soldering up my TF534. I could never design it myself but I love building stuff. I haven't received my sockets and CPU yet and am also waiting for a Xilinx programmer. A little confused about the software because it seens excessive to install 20 GB of software to program a CPLD. :)

I installed a 33 MHz oscillator for now and will try 50 if it works with 33.

Lynxman/Grumpy Modeler
Attachments
TF534-01.jpg
TF534-01.jpg (118.84 KiB) Viewed 1017 times

PaulJ_2.0
Posts: 229
Joined: Sat May 11, 2019 11:32 pm

Re: Noob building a TF534

Post by PaulJ_2.0 » Tue Dec 03, 2019 8:09 pm

That all looks rather nice, well done and good luck on it working first time.

Programming the CPLD's are probably best done with a raspberry pi if you only need to do the one.
You can probably wire, compile and flash with the pi faster than you can download the ISE software, let alone install it and get it working :)

Good luck with that for sure :)

User avatar
arkadiusz.makarenko
Posts: 264
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: Noob building a TF534

Post by arkadiusz.makarenko » Tue Dec 03, 2019 10:52 pm

I bought programmer, and reverted back to RPi very quickly.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem

Lynxman
Posts: 89
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman » Tue Dec 03, 2019 11:50 pm

I've got an unused Rpi. Is there a guide on how to do that?

Lynxman
Posts: 89
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman » Wed Dec 04, 2019 2:06 am

I found it: https://github.com/terriblefire/tf530/w ... spberry-Pi

Can i program them without a CPU installed? I haven't received my CPU and sockets (two sockets, will probably build the next version as well).

Lynxman
Posts: 89
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman » Wed Dec 04, 2019 3:27 am

Almost done with the Rpi.
Attachments
TF534-02.jpg
TF534-02.jpg (64.87 KiB) Viewed 960 times

Lynxman
Posts: 89
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman » Wed Dec 04, 2019 6:02 am

What a bloody chore linux is. How do I install lsb-release and where can I get a compiled version of xc3prog? I don't have wifi on the Rpi.

EDIT:
Found an ethernet cable and was able to install lsb-release. xc3prog no longer recognized sysfsgpio though. after failing to run "sudo xc3sprog -c sysfsgpio" It lists the known cables but sysfsgpio isn't there.

terriblefire
Moderator Team
Moderator Team
Posts: 1852
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Noob building a TF534

Post by terriblefire » Wed Dec 04, 2019 7:29 am

Lynxman wrote:
Wed Dec 04, 2019 2:06 am
I found it: https://github.com/terriblefire/tf530/w ... spberry-Pi

Can i program them without a CPU installed? I haven't received my CPU and sockets (two sockets, will probably build the next version as well).
Yes. But you need everything powered up on the board
———
I get cranky when asked to repeat myself.

terriblefire
Moderator Team
Moderator Team
Posts: 1852
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Noob building a TF534

Post by terriblefire » Wed Dec 04, 2019 7:43 am

Lynxman wrote:
Wed Dec 04, 2019 6:02 am
What a bloody chore linux is. How do I install lsb-release and where can I get a compiled version of xc3prog? I don't have wifi on the Rpi.

EDIT:
Found an ethernet cable and was able to install lsb-release. xc3prog no longer recognized sysfsgpio though. after failing to run "sudo xc3sprog -c sysfsgpio" It lists the known cables but sysfsgpio isn't there.
There are pre-canned images with everything you need on this forum. If you are struggling maybe @supaduper can link you them.

Honestly find Linux to be the simplest OS ever. Apt get grabs everything you need mostly.
———
I get cranky when asked to repeat myself.

Lynxman
Posts: 89
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman » Wed Dec 04, 2019 8:06 am

Thanks. I searched and found his preinstalled pie image and will try that.

I also tried sysfsgpio_creator, which is in the cablelist.txt, but that's not working either.
Attachments
TF534-03.gif
TF534-03.gif (59.38 KiB) Viewed 934 times

Post Reply

Return to “TF534 (OBSOLETE)”