Noob building a TF534

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

Post Reply
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

I've got a 33 MHz oscillator and can try swapping later on.
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

I'm running the latest alpha firmware. The graphical corruption wiht those three games happens all the way from the start at the loading screen, so I'm not sure it's the CPU speed.

Here's a shot of the the card. The Compact flash card isn't used yet. The Kickrom is relocated.
Amiga25.jpg
Amiga25.jpg (106.94 KiB) Viewed 3460 times
And here are my 3D printed accessories for the Amiga. Goteck case, MeanWell PSU case and gamepad.
Amiga26.jpg
Amiga26.jpg (66.3 KiB) Viewed 3460 times
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

It does the same at 33 MHz. I don't expect flawless functionality with all games with this card. I've got another 030 (plastic top) on the way which I will try as a comparison.

I partitioned the CF card too now and it works too, so IDE is also working.
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: Noob building a TF534

Post by arkadiusz.makarenko »

Lynxman wrote: Mon Jan 06, 2020 7:16 pm It does the same at 33 MHz. I don't expect flawless functionality with all games with this card. I've got another 030 (plastic top) on the way which I will try as a comparison.

I partitioned the CF card too now and it works too, so IDE is also working.
Check CPU socket?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

It works in most games. Elite 2 is smooth and awesome. Installing F1GP now to the HD. Will figure out WHDLoad later on.

Have you tried Hard Drivin' on your TF534?
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

If I wanted to waste some money and install an FPU, is there a certain model FPU I should get?
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: Noob building a TF534

Post by PhilC »

Lynxman wrote: Tue Jan 07, 2020 11:22 am If I wanted to waste some money and install an FPU, is there a certain model FPU I should get?
Its a plcc version of the mc68882fn40 that I use in mine
If it ain't broke, test it to Destruction.
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

Thanks.

Here's a video of the Frontier intro running:


I wrapped my TF534 in kapton tape today, except the CPU and headers, to reduce the risk of ESD damage if I handle it to replace CPU.

EDIT:
Actually, I could design a 3D printable a case for it with exposed CPU top and header pins, and venting holes for the RAM.
Lynxman
Posts: 180
Joined: Sun Nov 24, 2019 8:09 pm

Re: Noob building a TF534

Post by Lynxman »

Has anyone else tried the games I mentioned with their TF534?
User avatar
chue
Posts: 70
Joined: Wed Dec 19, 2018 4:46 pm
Location: United States

Re: Noob building a TF534

Post by chue »

I’m not at home, so can’t try any games at the moment. I wouldn’t worry about glitches until you try the whdload versions
Post Reply

Return to “TF534 (OBSOLETE)”