TF330 Rev 2 is Ready
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF330 Rev 2 is Ready
i will give 95288XL a go. Assume, it's not difficult to recompile Your existing FW to it
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 2 is Ready
Actually dont bother. I just realized that the data bus is only 8 bits to the CPLD. So I cant man in the middle Paula writes. Would need someone to write a serial port driver.8 Bit Dreams wrote: ↑Thu Jan 03, 2019 6:47 pm i will give 95288XL a go. Assume, it's not difficult to recompile Your existing FW to it
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 2 is Ready
Boards have shipped! 🏎
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- steve.bryce
- Posts: 1
- Joined: Tue Jan 08, 2019 11:03 am
Re: TF330 Rev 2 is Ready
Great news! I've been lurking watching developments for a while. I'd been looking at the 328, but decided to wait given how close the 330 is. Unfortunately my soldering skills I think are not up to building from a bare board. Is anybody planning to build complete versions for sale?
Re: TF330 Rev 2 is Ready
Yes I and others will definitely assemble the TF330steve.bryce wrote: ↑Tue Jan 08, 2019 11:30 am Great news! I've been lurking watching developments for a while. I'd been looking at the 328, but decided to wait given how close the 330 is. Unfortunately my soldering skills I think are not up to building from a bare board. Is anybody planning to build complete versions for sale?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 2 is Ready
The beta testing team will be building them. And if not I’ll do them.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."