Ok these guys finally showed up
TF330 rev2 is here
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
TF330 rev2 is here
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 rev2 is here
And it looks like the dude that made them may have been sober this time.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 rev2 is here
JLCPCB this time as well? It was JLCPCB last time, right?
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 4 * Amiga 500 ][ Amiga 500+ ][ 2 * Amiga 600 ][ A1200 ][ Amiga 2000 w/ A2386 ][ Amiga 4000/030 w/ CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]
My lack of focus:
[ 4 * Amiga 500 ][ Amiga 500+ ][ 2 * Amiga 600 ][ A1200 ][ Amiga 2000 w/ A2386 ][ Amiga 4000/030 w/ CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 rev2 is here
Yeah I tend to stick with one manufacturer per board
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 rev2 is here
Looks pretty awesome S.
Excelent work buddy.
Excelent work buddy.
Re: TF330 rev2 is here
I'm gonna try ordering the Alliance ram for the rev2. If it works it would be a massive cost saving.
Also XC95144XLs are out of stock at Digikey atm...
Also XC95144XLs are out of stock at Digikey atm...
Re: TF330 rev2 is here
Hi Alen .i have thoroughly tested the Alliance and they work perfect bud so buy with confidence
https://www.digikey.co.uk/product-detai ... ND/6099740
And some XC95144XLs here at Digikey which I have bought and used
https://www.digikey.co.uk/product-detai ... -ND/826978
Re: TF330 rev2 is here
Oh that's great news. Thanks, cheep ram.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 rev2 is here
I am out of 0603 caps... RS order places
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 rev2 is here
Hi terriblefire.
Can you answer the question?
1. What 68030 processors will work?
2. Will Motorola MC68030RC50B 68030 50MHz work? What else?
3. The processor in the final version will stand on the panel?
4. What type of processor case is planned in the release version?
5. Will there be extra power on the board? I and a few people would like to see the opportunity to connect a cd-rom from a laptop.
The work of staff сd-rum is not satisfactory.
5. Do you need processors?
I have the following processors:
MC68EC020FG16
MC68EC020FG25
MC68EC030FE25B
MC68EC030FE25C
MC68EC040FE25A
MC68EC060ZU75
MC68LC040RC33
MC68LC060FE50
Thanks for your work.
2 alenppc - Hi bro))
Can you answer the question?
1. What 68030 processors will work?
2. Will Motorola MC68030RC50B 68030 50MHz work? What else?
3. The processor in the final version will stand on the panel?
4. What type of processor case is planned in the release version?
5. Will there be extra power on the board? I and a few people would like to see the opportunity to connect a cd-rom from a laptop.
The work of staff сd-rum is not satisfactory.
5. Do you need processors?
I have the following processors:
MC68EC020FG16
MC68EC020FG25
MC68EC030FE25B
MC68EC030FE25C
MC68EC040FE25A
MC68EC060ZU75
MC68LC040RC33
MC68LC060FE50
Thanks for your work.
2 alenppc - Hi bro))