TF330 Soft Reboot Issue (SOLVED)
Moderators: terriblefire, Terriblefire Moderator
Re: TF330 LoadResident Issue
OK, something was dodgy on my card then.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 LoadResident Issue
Try with no card?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 LoadResident Issue
OK. The problem does not seem to be anything to do with LoadResident. I can get LoadResident to work. The problem appears to be ANY kind of soft reboot.
With the RAM disabled and IDE at 14Mhz I get a hang. Sometimes this hang is short, sometimes its infinite.
With the RAM disabled and IDE at 14Mhz I get a hang. Sometimes this hang is short, sometimes its infinite.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Soft Reboot Issue
I will emulate your tests again tomorrow to make sure we are on the same song sheet
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Soft Reboot Issue
Ok what I can tell you is that the IDE interface is getting polled alot during this hang.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Soft Reboot Issue
OK i got a trace on the CPU when in the hung state
Appears to be in this routine its hanging...
Appears to be in this routine its hanging...
Code: Select all
ROM:00FBCF08 ; ---------------------------------------------------------------------------
ROM:00FBCF08 lea ($DA9000).l,a0
ROM:00FBCF0E move.b (a0),d0
ROM:00FBCF10 move.b d0,d1
ROM:00FBCF12 andi.b #$3C,d1
ROM:00FBCF16 beq.s locret_FBCF6E
ROM:00FBCF18 and.b ($DAA000).l,d1
ROM:00FBCF1E beq.s loc_FBCF62
ROM:00FBCF20 andi.b #$C3,d0
ROM:00FBCF24 or.b d1,d0
ROM:00FBCF26 move.l $34(a1),d1
ROM:00FBCF2A beq.s loc_FBCF62
ROM:00FBCF2C movem.l d1/a0-a1,-(sp)
ROM:00FBCF30 movea.l d1,a0
ROM:00FBCF32 movem.l $E(a0),a1/a5
ROM:00FBCF38 jsr (a5)
ROM:00FBCF3A movem.l (sp)+,d1/a0-a1
ROM:00FBCF3E eori.b #$3C,d0
ROM:00FBCF42 ori.b #$C0,d0
ROM:00FBCF46 move.b d0,(a0)
ROM:00FBCF48 movea.l $2C(a1),a1
ROM:00FBCF4C btst #3,$1A(a1)
ROM:00FBCF52 beq.s locret_FBCF6E
ROM:00FBCF54 moveq #0,d0
ROM:00FBCF56 movea.l d1,a0
ROM:00FBCF58 movem.l $E(a0),a1/a5
ROM:00FBCF5E jsr (a5)
ROM:00FBCF60 bra.s loc_FBCF6C
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Soft Reboot Issue
Steve to reiterate my findings
On a virgin untouched system like the ones I have sent to you, I can soft reboot all day no problem, but as soon as I use that damn Loadresident command the the OS breaks the soft reboot just wont work.
Can you reflash a cf with image you have and see what you get
On a virgin untouched system like the ones I have sent to you, I can soft reboot all day no problem, but as soon as I use that damn Loadresident command the the OS breaks the soft reboot just wont work.
Can you reflash a cf with image you have and see what you get
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Soft Reboot Issue
OK then something weird is going on because LoadResident works fine for me. Absolutely no issues. Just the reboot command that fails.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Soft Reboot Issue
Sorry mate I think I confused you,terriblefire wrote: ↑Thu Jan 31, 2019 7:28 am OK then something weird is going on because LoadResident works fine for me. Absolutely no issues. Just the reboot command that fails.
Just say Loadresident will update the icon lib but not soft reboot after, the OS is fine its just wont soft reboot after the command, thats why I keep saying on a Virgin system no problem it will reboot all day ..but use Loadresident and then there is no Soft reboot
I mean on the TF330 the same system we both use is fine , it runs 100% no problem and to be honest most people wont bother touching it as it`s CWB 3.1ADV so there is nothing really to update, and anyway its easy to put it on Winuae and update it
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Soft Reboot Issue
I agree. Its not the biggest issue.. The biggest issue is the disable jumpers. I'd like to figure it out though.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."