This one fixes the reset bug.
TF330 Rev 3 arrives
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
TF330 Rev 3 arrives
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Rev 3 arrives
Looking forward to getting this, not sure how I'll tell the TF328, but I'm sure she'll understand, given time.
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF330 Rev 3 arrives
Wanna really start to build them, however my boards in second parcel was also damaged, this is what i have at the moment...
Weird..my KEL Connecors was sent with tracked parcel - these wasn't damagedRetro computer hardware & repair in Germany
Re: TF330 Rev 3 arrives
Did you manage to successfully amend the original order for the 50 Rev2 boards or is this a separate batch/prototype?
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 3 arrives
No. I lost all the money on the rev2 batch. On the bright side I didn’t pay customs or postage on them. Which together is £100.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 3 arrives
Hmmm. I’m just gonna stop shipping to Germany I think.8 Bit Dreams wrote: ↑Mon Feb 25, 2019 11:29 pm Wanna really start to build them, however my boards in second parcel was also damaged...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Rev 3 arrives
Ouch! that's unfortunate, but could have been worse I suppose. Happy to pay a supplement for a Rev3 PCB to offset some of your outlay. I see the pre-built floodgates have opened on Amibay!
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 3 arrives
No need. I only have 8 left of the batch of 50 that arrived anyways..
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF330 Rev 3 arrives
..dont know what to think about it currently..terriblefire wrote: ↑Tue Feb 26, 2019 8:05 am
Hmmm. I’m just gonna stop shipping to Germany I think.
is it just bad luck, bad carma, or a sorting technology (machine) that makes to much tension and smashes pcb's..don't know, really..
Of what im sure - i can't offer such condition boards - will get negative feedbacks sooner as i can blink.. have 100% positive currently, and would like to keep them at this level..
Maybe just need to make bigger orders, so these be posted in a box...or just wait patiently till gerbers are released
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Rev 3 arrives
This time I marked the boards as do not bend. :/ very strange. its almost like they're being dropped. But they're in a padded envelope so they must have been hit with some force.8 Bit Dreams wrote: ↑Tue Feb 26, 2019 9:36 pm ..dont know what to think about it currently..
is it just bad luck, bad carma, or a sorting technology (machine) that makes to much tension and smashes pcb's..don't know, really..
Of what im sure - i can't offer such condition boards - will get negative feedbacks sooner as i can blink.. have 100% positive currently, and would like to keep them at this level..
Maybe just need to make bigger orders, so these be posted in a box...or just wait patiently till gerbers are released
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."