TF330 Gerbers leaked?

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 316
Joined: Fri Nov 09, 2018 7:12 am

TF330 Gerbers leaked?

Post by 8 Bit Dreams » Sun May 12, 2019 11:55 am

Are TF330 gerbers leaked?
https://www.ebay.com/itm/TF330-Expansio ... 3214133657
there's no TF logo on them... :shock: :?

alenppc
Moderator Team
Moderator Team
Posts: 253
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF330 Gerbers leaked?

Post by alenppc » Sun May 12, 2019 2:11 pm

They have not leaked, this is my sale.

Unfortunately very little interest in the 330.

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 316
Joined: Fri Nov 09, 2018 7:12 am

Re: TF330 Gerbers leaked?

Post by 8 Bit Dreams » Sun May 12, 2019 4:40 pm

Oh.. Good to know, Alen...
Well, seems this was dumb question.. :oops:

alenppc
Moderator Team
Moderator Team
Posts: 253
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF330 Gerbers leaked?

Post by alenppc » Sun May 12, 2019 6:08 pm

Also, the red boards pictured were an experiment with 0.7mm added to the edge connector in the hope that the board house would bevel them (they didn’t). This actually makes hand bevelling a lot easier and apparently it follows some ISO standard.

Anyway for those moaning about Ebay prices, please realize that Ebay takes a straight $50 cut. I am not making this up. You are very welcome to buy them directly and save on the Ebay fee.

terriblefire
Moderator Team
Moderator Team
Posts: 1063
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF330 Gerbers leaked?

Post by terriblefire » Sun May 12, 2019 8:52 pm

I let Alen have the Gerbers to try a few different options checked out with the edge bevelling.
———
I get cranky when asked to repeat myself.

fluffyfreak
Posts: 4
Joined: Wed Dec 19, 2018 11:02 am

Re: TF330 Gerbers leaked?

Post by fluffyfreak » Mon May 13, 2019 9:46 am

Odd that there isn't much interest, mines flipping amazing! :D

I am super impressed with it (bought from supaduper via amibay).

terriblefire
Moderator Team
Moderator Team
Posts: 1063
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF330 Gerbers leaked?

Post by terriblefire » Mon May 13, 2019 10:25 am

Probably more interest in Europe as the CD32 sold more units here
———
I get cranky when asked to repeat myself.

alenppc
Moderator Team
Moderator Team
Posts: 253
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF330 Gerbers leaked?

Post by alenppc » Mon May 13, 2019 11:37 am

Based on the 328 numbers, I was expecting the 330 to ship about 100 units, but I only shipped 50, so I am stuck with lots of unused cplds and ram chips. But luckily at least I can recycle the cplds on the 360.

fluffyfreak
Posts: 4
Joined: Wed Dec 19, 2018 11:02 am

Re: TF330 Gerbers leaked?

Post by fluffyfreak » Mon May 13, 2019 11:44 am

Maybe the TF360 has cannibalised interest in the TF330?

I know that I'll be getting one (TF360) to swap out the TF328 in my other CD32 eventually but I bet most people don't have multiple CD32's :D

terriblefire
Moderator Team
Moderator Team
Posts: 1063
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF330 Gerbers leaked?

Post by terriblefire » Mon May 13, 2019 11:47 am

TF330 is available now. TF360 is still a long way off and there will be compatibility issues.

EDIT: for the folks that demand we do assembly runs.. Alen has £2000 of boards there.. assembly runs would be way more risky and we’d need to change more to cover that risk.
———
I get cranky when asked to repeat myself.

Post Reply