Are TF330 gerbers leaked?
https://www.ebay.com/itm/TF330-Expansio ... 3214133657
there's no TF logo on them...
TF330 Gerbers leaked?
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
TF330 Gerbers leaked?
Retro computer hardware & repair in Germany
Re: TF330 Gerbers leaked?
They have not leaked, this is my sale.
Unfortunately very little interest in the 330.
Unfortunately very little interest in the 330.
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF330 Gerbers leaked?
Oh.. Good to know, Alen...
Well, seems this was dumb question..
Well, seems this was dumb question..
Retro computer hardware & repair in Germany
Re: TF330 Gerbers leaked?
Also, the red boards pictured were an experiment with 0.7mm added to the edge connector in the hope that the board house would bevel them (they didn’t). This actually makes hand bevelling a lot easier and apparently it follows some ISO standard.
Anyway for those moaning about Ebay prices, please realize that Ebay takes a straight $50 cut. I am not making this up. You are very welcome to buy them directly and save on the Ebay fee.
Anyway for those moaning about Ebay prices, please realize that Ebay takes a straight $50 cut. I am not making this up. You are very welcome to buy them directly and save on the Ebay fee.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Gerbers leaked?
I let Alen have the Gerbers to try a few different options checked out with the edge bevelling.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Posts: 10
- Joined: Wed Dec 19, 2018 11:02 am
Re: TF330 Gerbers leaked?
Odd that there isn't much interest, mines flipping amazing!
I am super impressed with it (bought from supaduper via amibay).
I am super impressed with it (bought from supaduper via amibay).
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Gerbers leaked?
Probably more interest in Europe as the CD32 sold more units here
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Gerbers leaked?
Based on the 328 numbers, I was expecting the 330 to ship about 100 units, but I only shipped 50, so I am stuck with lots of unused cplds and ram chips. But luckily at least I can recycle the cplds on the 360.
-
- Posts: 10
- Joined: Wed Dec 19, 2018 11:02 am
Re: TF330 Gerbers leaked?
Maybe the TF360 has cannibalised interest in the TF330?
I know that I'll be getting one (TF360) to swap out the TF328 in my other CD32 eventually but I bet most people don't have multiple CD32's
I know that I'll be getting one (TF360) to swap out the TF328 in my other CD32 eventually but I bet most people don't have multiple CD32's
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Gerbers leaked?
TF330 is available now. TF360 is still a long way off and there will be compatibility issues.
EDIT: for the folks that demand we do assembly runs.. Alen has £2000 of boards there.. assembly runs would be way more risky and we’d need to change more to cover that risk.
EDIT: for the folks that demand we do assembly runs.. Alen has £2000 of boards there.. assembly runs would be way more risky and we’d need to change more to cover that risk.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."