TF330 Red and Green screen on Diagrom

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
kulamario
Posts: 237
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: TF330 Red and Green screen on Diagrom

Post by kulamario »

no short to GND on D3
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF330 Red and Green screen on Diagrom

Post by terriblefire »

kulamario wrote: Tue May 18, 2021 6:57 pm no short to GND on D3
Its shorted to something or not connected at all.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
kulamario
Posts: 237
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: TF330 Red and Green screen on Diagrom

Post by kulamario »

I give up with this board

I show you second

Code: Select all

Addr $00008400  Number of 32K blocks found: $01
Chipmem Shadowram detected, guess there is no more chipmem, stopping here

Startaddr: $00000400  Endaddr: $00007FFF
<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<>0000040001000084000000040000007FFF<
this what I get on diagrom
User avatar
kulamario
Posts: 237
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: TF330 Red and Green screen on Diagrom

Post by kulamario »

terriblefire wrote: Tue May 18, 2021 7:31 pm
kulamario wrote: Tue May 18, 2021 6:57 pm no short to GND on D3
Its shorted to something or not connected at all.
yesterday I got new pcb, I soldered all the elements from the non-working tf330 it went without problems So I suspect something is wrong with the pcb
Post Reply

Return to “TF330”