I Don’t suppose you could do a custom 3.2 Rom?Danoo wrote: ↑Sat Sep 25, 2021 1:20 pmGood to hear you have it up and running
Just put together a custom 31 ROM with the eide.device included. Now the IDEs on the TF1230 & 1260 work straight-up no other boot device required. Not a difficult process, and there are number of tutorials available.
I did notice the 1260 boots quite a bit faster than the 1230 using the latest eide.device.
TF1230 Beta Interest (Open Source)
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: TF1230 Beta Interest (Open Source)
Re: TF1230 Beta Interest (Open Source)
Should not be a problem, I do not have 3.2, but if you just search for a tutorial on creating a custom Amiga ROM, it is a fairly easy task.
You just need a eeprom programmer (something like a minipro with a 27C400 adapter) and a couple of blank 27C400 eeproms.
I used 'mfilos' 3.9 ROM tutorial, and simply changed a few things to suit 3.1.
Life is really simple, but we insist on making it complicated - Confucius
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
Just a little update. So far as I can tell this is only not working on the Rev 1D1 now. Can other report their experiences good and bad.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1230 Beta Interest (Open Source)
I do have a 1D1 buried in a box somewhere, will try to find it and see how it goes.terriblefire wrote: ↑Sun Sep 26, 2021 9:27 pm Just a little update. So far as I can tell this is only not working on the Rev 1D1 now. Can other report their experiences good and bad.
Life is really simple, but we insist on making it complicated - Confucius
Re: TF1230 Beta Interest (Open Source)
Found the 1D1, did a quick test with mask, eeprom and custom ROM sets. Booted and worked with both A1200 and TF1230 IDE's.
Was only a short test with each set of ROMS (31), as time was limited today.
Do you require any specific tests on the 1D1 motherboard were others have had issues
Was only a short test with each set of ROMS (31), as time was limited today.
Do you require any specific tests on the 1D1 motherboard were others have had issues
Life is really simple, but we insist on making it complicated - Confucius
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
Thanks. I think there may be specific machines that are sulky. I can make a hardware fix to solve this but i'd rather not if i can help it.Danoo wrote: ↑Mon Sep 27, 2021 7:28 am Found the 1D1, did a quick test with mask, eeprom and custom ROM sets. Booted and worked with both A1200 and TF1230 IDE's.
Was only a short test with each set of ROMS (31), as time was limited today.
Do you require any specific tests on the 1D1 motherboard were others have had issues
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1230 Beta Interest (Open Source)
Detected, boots and runs without issue here on a Rev 1D.1 with 3.2 ROM (47.96)
CPLD : XC95144XL 10C
Memory : IS42S16320B - 6TLI
Will test other ROM versions this evening if time permits.
CPLD : XC95144XL 10C
Memory : IS42S16320B - 6TLI
Will test other ROM versions this evening if time permits.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
I have received a TF1230 with 288s from @go0se
also got some whisky from @arkadiusz.makarenko in one piece
also got some whisky from @arkadiusz.makarenko in one piece
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1230 Beta Interest (Open Source)
OK OK, so the things I send are boring by comparison,... no need to shame me!terriblefire wrote: ↑Mon Sep 27, 2021 11:48 am I have received a TF1230 with 288s from @go0se
also got some whisky from @arkadiusz.makarenko in one piece
& If you combine the two received items then the resulting firmware mod is bound to be a winner!
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TF1230 Beta Interest (Open Source)
Technically it is not whiskey, but oak matured rye vodka.terriblefire wrote: ↑Mon Sep 27, 2021 11:48 am I have received a TF1230 with 288s from @go0se
also got some whisky from @arkadiusz.makarenko in one piece
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem