TF1230 Beta Interest (Open Source)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

culexus
Posts: 11
Joined: Thu Apr 01, 2021 10:13 pm

Re: TF1230 Beta Interest (Open Source)

Post by culexus »

Thank you supaduper :) I understand allot more after reading your perfect guide. Now I have something to do the next week.
Soldering is easy but the the software stuff and how it works on the amiga side is not my strongest thing.
ICRY
Posts: 21
Joined: Thu Nov 08, 2018 5:26 pm

Re: TF1230 Beta Interest (Open Source)

Post by ICRY »

Thank you superduper for a great guide, just trying to do a custom 3.1 build in winuae & I run out of space for ehide.device

3.1custom.jpg
3.1custom.jpg (76.23 KiB) Viewed 3092 times
User avatar
supaduper
Posts: 557
Joined: Thu Nov 08, 2018 12:05 pm

Re: TF1230 Beta Interest (Open Source)

Post by supaduper »

That guide is for rom 3.2, if you are doing a custom 3.1 then I do mention that you `REMOVE` the Workbench.library from the build List, make sure that you then manually replace the Workbench.library back into Libs on the System disk otherwise it will not work

Download Workbench Library here:
http://www.amigaforever.com/classic/download/
dragmar
Posts: 53
Joined: Mon Aug 06, 2018 8:12 am

Re: TF1230 Beta Interest (Open Source)

Post by dragmar »

I soldered to my Amiga rev. 2B TF1230.
CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536.
Programmed CPLD -
tf1230r1_2021_09_14_RC1.zip

I tested WHDLOAD games

Tested by internal IDE 1200 and works fine.

I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.

Someone can check it if this is the case.
terriblefire
Moderator Team
Moderator Team
Posts: 5362
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1230 Beta Interest (Open Source)

Post by terriblefire »

dragmar wrote: Wed Oct 06, 2021 9:47 am I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.

Someone can check it if this is the case.
Which games. We need a little more information. Also try the later beta.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
dragmar
Posts: 53
Joined: Mon Aug 06, 2018 8:12 am

Re: TF1230 Beta Interest (Open Source)

Post by dragmar »

OS32, WHDLOAD 18.5
lure of the temptress, ishar
markus0321
Posts: 144
Joined: Sat Dec 19, 2020 11:42 am
Location: Zielona Gora

Re: TF1230 Beta Interest (Open Source)

Post by markus0321 »

dragmar wrote: Wed Oct 06, 2021 9:47 am I soldered to my Amiga rev. 2B TF1230.
CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536.
Programmed CPLD -
tf1230r1_2021_09_14_RC1.zip

I tested WHDLOAD games

Tested by internal IDE 1200 and works fine.

I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.

Someone can check it if this is the case.
Try to run MuFastROM from the MMU_libs package from aminet before loading the game. For me, when I run FastROM, the problems with ehide disappear, if I leave it in the ROM memory, it is unstable.
User avatar
AndreaM
Posts: 29
Joined: Mon Jun 21, 2021 4:43 pm

Re: TF1230 Beta Interest (Open Source)

Post by AndreaM »

I have a similar problem with WHDload 18.5 & Dragon Tiles AGA on my TF1260 and the original firmware. Everything else works really well

ehide.device loaded at the beginning of startup-sequence, MuFastROM called from user-startup. I didn't really investigate since the DoM I use won't fit under my keyboard, just went back to the internal IDE and enjoying the rest of the card. :)
a caffeine addict and known hater of mornings that answers to either Andrea or fluffkitten
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: TF1230 Beta Interest (Open Source)

Post by Avinitlarge »

Which are the best ram chips to use for 128mb? I’ve seen a few different ones mentioned.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF1230 Beta Interest (Open Source)

Post by 8 Bit Dreams »

terriblefire wrote: Thu Sep 30, 2021 9:00 am <Snip>
Issi "IS42S16320F-7TL" for 128MB: Everything works perfect in all circumstances without errors in WHDLoad.
<Snip>
Retro computer hardware & repair in Germany
Post Reply

Return to “TF330”