Danoo wrote: ↑Wed Sep 01, 2021 8:03 pm
Ordered my parts straight off the 1230 Schematic file in Eagle that file is showing a XC95288XL as the CPLD
Ah sorry.. its the same footprint and its pin compatible.. you'll just need a different jed
Maybe it would be possible to somehow convert the Jedec file from xc95144 to Xc95288?
I made the same mistake as Danoo but unfortunately I have already soldered the chip to the board, eh ...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Should TF1230 boot with no memory attached? Was going to start building, thought maybe I should get the CPLD on and programmed, 030, passives and clocks, and check that first.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Exciting times for the A1200. I have a 1D4 that has been waiting for keycaps for the new mech keyboard to be ready for the lid to be screwed down for the first time in a year. Yesterday they arrived, everything was plugged in and turned on. It was a very happy moment when it booted again from the HD after reinstalling 3.1.4. So looking forward to putting the A1230 in there too!
terriblefire wrote: ↑Sat Sep 18, 2021 12:15 am
I can compile for 288... let me sober up first.
Thanks a lot! I will wait patiently
Hehe. Now I couldn't sleep and the first thing I did in the morning was reading the forum. Let me know when you will be able to compile this batch under 288 because I'm not so patient anymore?
EDIT: Since i dont actually have a 1230 with a 288 CPLD its untested.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire wrote: ↑Sat Sep 18, 2021 11:39 am
Alpha for the 288 CPLDs....
tf1230r1_main_top_288.zip
EDIT: Since i dont actually have a 1230 with a 288 CPLD its untested.
Wow! I already have the entire TF1230 soldered, I'm programming the CPLD right away and I'm starting to run it and test it.
Thanks a lot for the quick help. You are great
terriblefire wrote: ↑Sat Sep 18, 2021 11:39 am
Alpha for the 288 CPLDs....
tf1230r1_main_top_288.zip
EDIT: Since i dont actually have a 1230 with a 288 CPLD its untested.
Wow! I already have the entire TF1230 soldered, I'm programming the CPLD right away and I'm starting to run it and test it.
Thanks a lot for the quick help. You are great
Not working...
There is only a black screen on the diag-rom. I checked the soldering under a microscope and it looks good. My A1200 is rev 2b will try to do timingfix, if it doesn't help, I will check it on version 1.d4 1.d1 .....
and the first thing I did in the morning was reading the forum. Let me know when you will be able to compile this batch under 288 because I'm not so patient anymore? 