ALPHA CPU Extension Board - Yes Another Tower

Related information and WIP etc
User avatar
Icky
Moderator
Moderator
Posts: 1375
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: ALPHA CPU Extension Board - Yes Another Tower

Post by Icky » Sat Jun 15, 2019 11:03 am

For those making the extension board I thought I would make the patch clearer to see if you decide to remove the patch resistors from underneath.

This was my board with the patch resistor under the white tape and lines. There was also another line to the other SIL resistor as well:

IMG_3973.jpg
IMG_3973.jpg (251.46 KiB) Viewed 228 times

After removing the patch (because you are using the extension board SIL) the underside should look like this:

IMG_3999 (1).jpg
IMG_3999 (1).jpg (147.32 KiB) Viewed 228 times

There is a patch you need to do on the extension board but its a small wire not so messy as the Remake board patch it replaces.

IMG_3975.jpg
IMG_3975.jpg (194.9 KiB) Viewed 228 times

Post Reply

Return to “MONGREL EDITION DEVELOPMENT & INFO”