ST-IDE-ROM Dev Board v1 - BETA Testers

Related information and WIP etc
User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1201
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Fri Mar 13, 2020 4:55 pm

Just feed Harry.. looked a little lean. :girldance:

User avatar
PhilC
Moderator
Moderator
Posts: 2503
Joined: Fri Mar 23, 2018 8:22 pm

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PhilC » Fri Mar 13, 2020 4:57 pm

PaulJ wrote:
Fri Mar 13, 2020 4:55 pm
Just feed Harry.. looked a little lean. :girldance:
I just helped to fatten him up a bit as well :lol:
If it ain't broke, test it to Destruction.

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2002
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Fri Mar 13, 2020 5:12 pm

He should be quite happy now, I've also fed him :)
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1201
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Fri Mar 13, 2020 5:32 pm

I knew down deep Harry is a glutton.. :sigh:

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2002
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Fri Mar 13, 2020 11:28 pm

Oooh I forgot this: :girldance: :girldance: :girldance:
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1201
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Mon Mar 16, 2020 6:25 pm

@exxos , what is the IDE connector pin pitch on the new 1.1 IDE board? Thanks

DoG
Posts: 189
Joined: Sat Apr 07, 2018 12:26 pm

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by DoG » Mon Mar 16, 2020 8:31 pm

PaulJ wrote:
Mon Mar 16, 2020 6:25 pm
@exxos , what is the IDE connector pin pitch on the new 1.1 IDE board? Thanks
Check the part list/BOM in this thread. But I can help you right away, it is 2mm :D ;)

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1201
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Mon Mar 16, 2020 8:50 pm

DoG wrote:
Mon Mar 16, 2020 8:31 pm
PaulJ wrote:
Mon Mar 16, 2020 6:25 pm
@exxos , what is the IDE connector pin pitch on the new 1.1 IDE board? Thanks
Check the part list/BOM in this thread. But I can help you right away, it is 2mm :D ;)
Oh, its the 0.0787 pitch instead of the 0.1 pitch used on the initial board. :) :)
Untitled.png
Untitled.png (10.93 KiB) Viewed 64 times

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2002
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Mon Mar 16, 2020 9:04 pm

It's 44 pin ide isn't it, rather than standard 40 pin.
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1201
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Mon Mar 16, 2020 10:53 pm

rubber_jonnie wrote:
Mon Mar 16, 2020 9:04 pm
It's 44 pin ide isn't it, rather than standard 40 pin.
Yup, the initial board used a header with 0.1" pitch. So the 0.0787402" pitch are the smaller connectors used with the 44 pin. Guess I'll have to order some one these header pins.

Post Reply

Return to “MONGREL EDITION DEVELOPMENT & INFO”