Trudie - The Next IDE Board

All the good stuff hardware and software wise for the Phoenix H5 series motherboards.
Post Reply
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Trudie - The Next IDE Board

Post by Icky »

Welcome to Trudie the next IDE board.

Apologies Exxos and I seem to have started naming boards (wonder if you have spotted the other names out there). Trudie is a play on the words True IDE.

Thanks to all the BETA testers on the DEV board https://www.exxosforum.co.uk/forum/viewt ... &start=430 we have created the next version which includes all the fixes found during testing. Some additional features are hardware byte swapping and IDE Master / Slave ports at the smaller 2.5" drive cable pitch.

We have only just got two of these built and we now need to get them up and running to test further.

IMG_4205 (1).jpg
IMG_4205 (1).jpg (223.42 KiB) Viewed 6856 times
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Trudie - The Next IDE Board

Post by exxos »

So people understand byte swapping.. its to make cards PC & ST compatible without "software byte swapping" which is very slow. The swap will be done in hardware and so, no speed loss. The firmware will take care of all the clever switching.

I think getting away from all the issues in swapping cards between ST & PC needs to be solved. It always seems to much of a faff about in swapping files across. So once this board is finished, it will all be a thing of the past 8-)
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: Trudie - The Next IDE Board

Post by PaulJ »

Exxos/ICKY... Very Nice, dual IDE, flash, and other goodies based on chip count. :bravo: :coolpics: :goodpost:
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Trudie - The Next IDE Board

Post by exxos »

Thanks to Icky, this sexy looking contraption arrived today....

trudie.jpg
trudie.jpg (399.63 KiB) Viewed 6793 times

I guess I should try and do some firmware for it soon :)
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: Trudie - The Next IDE Board

Post by PaulJ »

exxos wrote: Sun Jul 21, 2019 10:59 pm Thanks to Icky, this sexy looking contraption arrived today....
I guess I should try and do some firmware for it soon :)
Wow!! there for a second I thought you lost the chip in the upper left corner from the first picture but after closer examination that chip was on the motherboard. Whew.. I need to get my eyes checked. :oops: :oops: :oops:
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Trudie - The Next IDE Board

Post by exxos »

PaulJ wrote: Sun Jul 21, 2019 11:20 pm Wow!! there for a second I thought you lost the chip in the upper left corner from the first picture but after closer examination that chip was on the motherboard. Whew.. I need to get my eyes checked. :oops: :oops: :oops:
You mean the ROM chip ? I've not programmed one for it yet.. I literally only just unpacked it..

It the same as the previous ide board only this is the next version which will have byte swapping. But no firmware at all for this current ide board yet.. Hopefully in a few days I can make a start.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
displaced
Posts: 42
Joined: Sat May 19, 2018 11:15 pm
Location: UK

Re: Trudie - The Next IDE Board

Post by displaced »

Brilliant stuff!

Seeing it fitted, though, I’m now sure this won’t fit on my C103253 board. Even if the angle was enough to avoid the MMU, the slot for the case post is directly above the 68000 on mine - right where Trudie would sit.

Never mind though - it’s a great bit of work!
A bunch of Ataris and others:
Atari XEGS with RGB mod - STFM - Portfolio - Lynx Mk1 with McWill display - Mega STE - Falcon030 - Jaguar
Commodore VIC-20 CR with ClearVideo - CDTV (Wicher 8MB+IDE)
Acorn Electron - Archimedes A3020
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Trudie - The Next IDE Board

Post by exxos »

I have been working on this all day and it seems the cupl compiler is messing up some of my code, I don't know why. The fault seems to on the previous IDE design as well. I emailed Atmel and asked about it..

Another odd thing I can't figure out, is the IRQ line on the CF card goes HI and triggers the IRQ on ACSI pin 10 (goes low) but it stays low all the time... as a result it stops the floppy drive from working :roll:

Its pretty much the same design and code as the previous IDE, so I have no idea why this new board is having all sorts of odd issues.

EDIT:
OK for some odd reason this seems to be relating to the odd compiler issue as well.. if I remove the problem parts of the code, then the IRQ line doesn't cause a issue..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
tzok
Posts: 337
Joined: Sat Dec 30, 2017 2:27 pm

Re: Trudie - The Next IDE Board

Post by tzok »

Which CUPL compiler do you use?
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Trudie - The Next IDE Board

Post by exxos »

tzok wrote: Sat Aug 03, 2019 11:35 am Which CUPL compiler do you use?
? The one it came with ?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “PHOENIX ZONE”