Bl**dy Queenslanders.
thought I would give it a whirl tonight, but my 060s are not in the A1200's packing box. They are somewhere in this mess, inventory failure. 
Being an arachnophobic northern European type is suspect i'd have a few freak out moments opening up that lot.
TF1260 stuff
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 stuff
Being an arachnophobic northern European type is suspect i'd have a few freak out moments opening up that lot.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1260 stuff
Wheee! All plugged in and rollin' along. Now we're suckin' diesel.
(Brief moment of panic when, like any naughty schoolkid I went straight to Sysinfo to see what was what, only to find it crash every time - at which point I realized Alen had included 3.24 on his CF image instead of something from this millennium...
)
(Brief moment of panic when, like any naughty schoolkid I went straight to Sysinfo to see what was what, only to find it crash every time - at which point I realized Alen had included 3.24 on his CF image instead of something from this millennium...
)Re: TF1260 stuff
Yes, sorry, I despise Sysinfo so never bothered updating it!
Re: TF1260 stuff
Assuming a full 060 is used tho? Or can I just install the whole shebang and work away? (Alen's suggestion seems to suggest I only use bits from it?)terriblefire wrote: ↑Mon Apr 12, 2021 9:20 am Literally the only 060 library i support is MMULib..
Even when a Norwegian solder dude sent me a card image that didnt work due to some weird Blizzard Lib... i made him go install MMULib
-
terriblefire
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 stuff
Full or not .... use MMULib.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1260 stuff
Yes, the MMU lib package has everything you need. It will install smart 68060.library and MuFastRom.
-
obitus1990
- Posts: 24
- Joined: Sun Feb 21, 2021 4:50 pm
- Location: Lacombe
Re: TF1260 stuff
Can I play too?
I love it! Especially now that it has a Rev6 CPU installed. Thanks for this awesome piece of hardware, Stephen.
- IMG_0878-1.jpg (225.35 KiB) Viewed 3167 times
I love it! Especially now that it has a Rev6 CPU installed. Thanks for this awesome piece of hardware, Stephen.
Re: TF1260 stuff
obitus1990 wrote: ↑Wed Apr 14, 2021 2:42 am I love it! Especially now that it has a Rev6 CPU installed. Thanks for this awesome piece of hardware, Stephen.
How fast can you run it with stability ?
-
terriblefire
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 stuff
It seems to vary setup to setup ... 75Mhz to 80Mhz for me.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."