Ok, i'll let You know, Alen
TF360 Discussions
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF360 Discussions
I have 15 cpu MC68LC060RC66. Soldered.
And I am ready to sell them. But for this I need to check them. I will wait for the first available release of the 360 motherboard. And after checking everyone, I will sell them if you need them and you are not afraid of what they are soldering.
These are the original Motorola processors. And they are cheap.))))
And I am ready to sell them. But for this I need to check them. I will wait for the first available release of the 360 motherboard. And after checking everyone, I will sell them if you need them and you are not afraid of what they are soldering.
These are the original Motorola processors. And they are cheap.))))
Re: TF360 Discussions
TF360.....third one to breathe Life aswell as Steve`s and Chuckys
- Attachments
-
- TF360 first contact.jpg (195.33 KiB) Viewed 5626 times
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Discussions
Is the bus CPLD getting warm?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Discussions
Yes Steve, its all getting warm lol, will have to heatsink the Volt reg like you
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Discussions
So by my rekoning i'm 3 months ahead of where I expected to be with this board. I was expecting alot more issues with the initial bringup.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Discussions
Mate you are well ahead, end of !
Re: TF360 Discussions
The 68060 libraries working now?
Re: TF360 Discussions
Hey.. do not jinx itterriblefire wrote: ↑Tue May 07, 2019 2:21 pm So by my rekoning i'm 3 months ahead of where I expected to be with this board. I was expecting alot more issues with the initial bringup.