TF360 Status
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Status
Now have supaduper's card booting DiagROM at 78Mhz.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Status
Ooo nice . Is that with a rev6 CPU ?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: TF360 Status
Superstar status attained
Re: TF360 Status
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 4 * Amiga 500 ][ Amiga 500+ ][ 2 * Amiga 600 ][ A1200 ][ Amiga 2000 w/ A2386 ][ Amiga 4000/030 w/ CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]
My lack of focus:
[ 4 * Amiga 500 ][ Amiga 500+ ][ 2 * Amiga 600 ][ A1200 ][ Amiga 2000 w/ A2386 ][ Amiga 4000/030 w/ CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]
Re: TF360 Status
78Mhz - you can't complain at that!
What is left to look at, Burst mode on RAM and the 3.3v supply? You mentioned previously about the CD Rom not working? Or did I get that wrong.
Out of interest here are some Sysinfo numbers I just found on a scrap of paper from previous internet searches:
Blizzard 1260 @ 66 Mhz - 50,560 Mips 53
Apollo. 1260 @ 80 Mhz - 58,284 Mips 62
Superduper - assuming you have a full CD32 with Reset switch it would be good to test PSU's, as my earlier issue with the TF330 not resetting was due to the PSU not being man enough. It seemed ok but resetting with the push button on top of the console resulted in a non-boot.
The lower current PSU also gave a lower intensity on the Power LED.
What is left to look at, Burst mode on RAM and the 3.3v supply? You mentioned previously about the CD Rom not working? Or did I get that wrong.
Out of interest here are some Sysinfo numbers I just found on a scrap of paper from previous internet searches:
Blizzard 1260 @ 66 Mhz - 50,560 Mips 53
Apollo. 1260 @ 80 Mhz - 58,284 Mips 62
Superduper - assuming you have a full CD32 with Reset switch it would be good to test PSU's, as my earlier issue with the TF330 not resetting was due to the PSU not being man enough. It seemed ok but resetting with the push button on top of the console resulted in a non-boot.
The lower current PSU also gave a lower intensity on the Power LED.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Status
It is.. i havent tried a rev 5 or 4 yet.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Status
I have almost every 060 revision, hopefully we can settle on something that will work on most so that people don’t have to hunt down a specific chip.
Re: TF360 Status
I have a rev1 and rev6 68060 cpus and they work both same cards (apollo & blizzard) what would be situation when specifig rev would bee needed?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Status
Rev 6 CPUs are (I think) a different manufacturing process and can clock to much higher speeds.
There may be other bug fixes. I’d need to look at the release notes
There may be other bug fixes. I’d need to look at the release notes
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Status
exxos dumped a load of 060 info: https://www.exxosforum.co.uk/atari/last/ ... /index.htm
Main summary of changes (apart from some bug fixes):
rev1: maskset 01F43G (1994, engraved 0.60µm)
rev2: maskset 01G65V (1996, engraved 0.60µm)
rev5: maskset 74E41J (1998, engraved 0.42µm) - note that max 80Mhz was achieved according to weblink.
rev6: maskset 71E41J (1999, engraved 0.32µm)
I guess 'WhichAMIGA' prog is key here as it can read the Rev number. I am sure we have all heard about the effort gone to by people removing original markings and re-printing with Rev 6 maskset numbers!!!
Main summary of changes (apart from some bug fixes):
rev1: maskset 01F43G (1994, engraved 0.60µm)
rev2: maskset 01G65V (1996, engraved 0.60µm)
rev5: maskset 74E41J (1998, engraved 0.42µm) - note that max 80Mhz was achieved according to weblink.
rev6: maskset 71E41J (1999, engraved 0.32µm)
I guess 'WhichAMIGA' prog is key here as it can read the Rev number. I am sure we have all heard about the effort gone to by people removing original markings and re-printing with Rev 6 maskset numbers!!!