What's wrong with it? I have the X-surf 100 version and it works great.
TF360 Rev 1 Arrives
Moderators: terriblefire, Terriblefire Moderator
Re: TF360 Rev 1 Arrives
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Its very processor intensive and it can only trigger a very high level interrupt. Cant trigger an INT2. Oh and its only 8 bits wide.
And it seems to be half assed ATA/IDE signal wise.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF360 Rev 1 Arrives
Failure rate reaches 90% on them.. Have heard a lot of complaints from users regarding this hardware, also saw a discussion here:
http://eab.abime.net/showthread.php?t=94507
Retro computer hardware & repair in Germany
Re: TF360 Rev 1 Arrives
Very nice work,
Looking forward to your next stream and if you`ve had any more thoughts on the possible riser pcb
Looking forward to your next stream and if you`ve had any more thoughts on the possible riser pcb
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF360 Rev 1 Arrives
Using Subway on A500 and A1200 for about three years, never got an issue, it just works like it should..
Would like to buy more Subways, but these are not available anymore..Retro computer hardware & repair in Germany
Re: TF360 Rev 1 Arrives
I can volunteer to test one with some clockport kit
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
The NOTPORT will be the last thing i look at on this board.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Missing some parts but...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Yeah. Last version supported 128/256 but I never tried the chips
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."