Chinese 060 Sockets any good?

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

chucky
Posts: 19
Joined: Sun Jan 13, 2019 8:42 pm

Re: Chinese 060 Sockets any good?

Post by chucky » Wed Mar 18, 2020 6:14 pm

I managed to buy 10 pullers a while ago from ebay.. gave my last (except that one I am using) to TF! :)

DoG
Posts: 254
Joined: Sat Apr 07, 2018 12:26 pm

Re: Chinese 060 Sockets any good?

Post by DoG » Wed Mar 18, 2020 6:27 pm

You can get 10-packs of these from Mouser, Farnell or Digikey. It doesn't seem that they have them in stock though.

Higgy
Posts: 75
Joined: Tue Apr 23, 2019 8:05 pm

Re: Chinese 060 Sockets any good?

Post by Higgy » Wed Mar 25, 2020 11:27 am

Anyone have any luck in finding something? Or made some ghetto tool to do the job.
I hopefully soon will need to extract a PGA and I don't want to fudge it up! Not bothered marking the socket so if small blades screwdrivers will do the job I will try that.

Probably getting some forced unpaid leave soon so will have time to replicate a tool from metal/plastic!

PaulJ_2.0
Posts: 291
Joined: Sat May 11, 2019 11:32 pm

Re: Chinese 060 Sockets any good?

Post by PaulJ_2.0 » Wed Mar 25, 2020 12:39 pm

Sharp smd tweezers work fine, they are tapered and will naturally miss the pins if you push them in square.

quantum8
Posts: 4
Joined: Tue Apr 23, 2019 7:20 am

Re: Chinese 060 Sockets any good?

Post by quantum8 » Sat Apr 04, 2020 2:02 am

Just make sure the tweezers are decent quality or your bend it.

I used a mobile phone spudger tool set I got from aliexpress which worked for me in removing an 040.

Post Reply

Return to “TF360”