All super news.
Do you know yet if a patch wire etc be added to the TF360 beta release card for the IDE improvement? It's fine if not. And will that mean a separate firmware to support the TF360 beta cards?
Cheers
The TF360 rev2 arrives
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF360 rev2 arrives
It will be a separate firmware. All the pins on the rev2 are used. Its just going to mean 4Mb/s instead of 5.3Mb/s. The firmware bundle will include both cards.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: The TF360 rev2 arrives
I am one of those crazy people who would like to have a 060 in the cd32, may I ask if the final version will be released at some point?
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF360 rev2 arrives
Pretty sure i've said this already that im working on the TF360 and TF4060. Its unlikely to do enough sales to get released open file but you will be able to buy them both from @alenppc and @supaduper. Probably @go0se and maybe @chucky will make a few.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: The TF360 rev2 arrives
Maybe is good idea do like tf536
Sale just boards
What you think about this Stephen?
Sale just boards
What you think about this Stephen?
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF360 rev2 arrives
No. These boards will only be sold by Alen, Supaduper and Chucky (and some from g0ose). I've already made promises that has them committed to buying parts in bulk. Unless they sell out of those parts the boards will not go open file. I will never sell unpopulated PCBs again.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: The TF360 rev2 arrives
How does one go about buying one of these cards from the folks you mentioned?
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF360 rev2 arrives
Well first of all i need to get it working properly. So its not for sale yet.
When that is done the lads can be PM'd either here or on Amibay.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: The TF360 rev2 arrives
Perfect - thanks for coming back to me so quickly. I'm pretty new to the forum so I'll figure it out, or Amibay will re-open the registrationterriblefire wrote: ↑Tue May 10, 2022 8:40 am When that is done the lads can be PM'd either here or on Amibay.
Re: The TF360 rev2 arrives
What are the power requirements for the TF360? I suppose the stock CD32 PSU will not suffice. Also, afan is a must or a passive heatsink is OK if not heavily overclocking?
Thinking about getting one once work is completed on it. Thank you.
Thinking about getting one once work is completed on it. Thank you.