It should be possible to update femu to support 060. Perhaps Thor could integrate It after it's adaptedalenppc wrote: ↑Wed Sep 02, 2020 9:12 pmYes, totally pointless. It does not emulate an FPU, simply removes the FPU managment code so even Femu crashes. Avoid.8 Bit Dreams wrote: ↑Wed Sep 02, 2020 9:10 pm Alen, did You tried to install this Lib?
http://www.amibay.com/showthread.php?11 ... ary-update
Getting software to work on 68LC060
Moderators: terriblefire, Terriblefire Moderator
Re: Getting software to work on 68LC060
Re: Getting software to work on 68LC060
Femu.040 works well enough, just use the regular 68060 libraries.
By the way, novacoder has kindly recompiled Zdoom for LC060 and even AmiQuake (but the latter runs like a slideshow, so it’s more of a ‘it-can-be-done’ type of thing.
By the way, novacoder has kindly recompiled Zdoom for LC060 and even AmiQuake (but the latter runs like a slideshow, so it’s more of a ‘it-can-be-done’ type of thing.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Getting software to work on 68LC060
Yeah If it was patched with the PocketQuake patches it would shift.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Getting software to work on 68LC060
I acquired a few LC cpus and tried them with my TF360. Two of them run happily but the other two just cause graphical glitches and no actual graphics.
Re: Getting software to work on 68LC060
Did WhichAmiga report all the LC's being the same Rev etc?
I expect Mr Remark will be busy teaching his crew how to remove 2 horizontal lines: EC -> LC
I expect Mr Remark will be busy teaching his crew how to remove 2 horizontal lines: EC -> LC
Re: Getting software to work on 68LC060
No I mean I just get some crap on screen so I don't get that far The CPUs look identical and very much legitimate, the ones that work are identified as rev 4. I had some fake chinese rev6s but they only gave me a black screen so this is something different so curious about this.