TF536 Rev 2 Design Complete (all gone)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete

Post by terriblefire »

Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
mattymuc
Posts: 12
Joined: Thu Jan 02, 2020 11:40 am

Re: TF536 Rev 2 Design Complete

Post by mattymuc »

Oh that looks like a terrible great Rev 2! Please add me to the list.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Rev 2 Design Complete

Post by 8 Bit Dreams »

terriblefire wrote: Fri Mar 20, 2020 5:50 pm Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
i have no doubt it will :!:
i'll go for 20 as soon as orders are open :P

Ps
maybe it is worth to send one board to @agranlund
he wanted to start to work on Atari ST firmware :arrow: :arrow: :arrow:
So TF536 will work on Atari's at the moment it will be released...just my thoughts
Retro computer hardware & repair in Germany
arananet
Posts: 15
Joined: Thu Nov 29, 2018 2:00 pm

Re: TF536 Rev 2 Design Complete

Post by arananet »

Please addme for one TF536.

Thanks!
Danoo
Posts: 249
Joined: Wed Jan 29, 2020 1:25 pm
Location: Queensland, Australia

Re: TF536 Rev 2 Design Complete

Post by Danoo »

terriblefire wrote: Fri Mar 20, 2020 5:50 pm Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
Will definitely like to purchase at least two, when you get to the bulk purchase, will be patiently watching
Life is really simple, but we insist on making it complicated - Confucius
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete

Post by terriblefire »

Seem to have missed 2 RNs off the assembly...
Screenshot 2020-03-21 at 23.18.20.png
Screenshot 2020-03-21 at 23.18.20.png (865.35 KiB) Viewed 3632 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Rev 2 Design Complete

Post by 8 Bit Dreams »

Ah, i see, RN2 & RN3 are not populated
thats ok, i like these small badgers 😀
Retro computer hardware & repair in Germany
User avatar
kulamario
Posts: 237
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: TF536 Rev 2 Design Complete

Post by kulamario »

Please add me to list 1xPCB
amimjf
Posts: 87
Joined: Sun Mar 22, 2020 8:25 am

Re: TF536 Rev 2 Design Complete

Post by amimjf »

Hi All,

Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.

I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.

regards.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete

Post by terriblefire »

amimjf wrote: Sun Mar 22, 2020 8:34 am Hi All,

Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.

I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.

regards.
BOMs will be available on github once the beta test phase is complete. Its subject to change until then.

Also... you dont need a full BOM anymore. The boards will come with all passives on already.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF536”