TF536 Rev 2 Design Complete (all gone)
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 41
- Joined: Sun Mar 24, 2019 2:19 pm
Re: TF536 Rev 2 Design Complete (all gone)
Well, I don't have a spare CPLD, as my one had the same bad packaging you had and all of the corner pins are bent.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
Did you get a refund from RS?LADmachining wrote: ↑Sat May 09, 2020 12:01 pm Well, I don't have a spare CPLD, as my one had the same bad packaging you had and all of the corner pins are bent.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Posts: 41
- Joined: Sun Mar 24, 2019 2:19 pm
Re: TF536 Rev 2 Design Complete (all gone)
Will have to contact them Monday, hopefully they can send me another.terriblefire wrote: ↑Sat May 09, 2020 12:04 pmDid you get a refund from RS?LADmachining wrote: ↑Sat May 09, 2020 12:01 pm Well, I don't have a spare CPLD, as my one had the same bad packaging you had and all of the corner pins are bent.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
You can do it automatically via the web interface.. Just go to returns.LADmachining wrote: ↑Sat May 09, 2020 12:29 pmWill have to contact them Monday, hopefully they can send me another.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
Has anyone tested the rev2 in an ST?
I've just tried my rev 1 and rev 2 with identical firmware code and the rev 1 is fine and the rev 2 sulks...
I've just tried my rev 1 and rev 2 with identical firmware code and the rev 1 is fine and the rev 2 sulks...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
I've had my Rev 2 running TOS 2.06 but its a bit hit and miss, I get 8 bombs sometimes and boots the next.terriblefire wrote: ↑Sat May 09, 2020 3:09 pm Has anyone tested the rev2 in an ST?
I've just tried my rev 1 and rev 2 with identical firmware code and the rev 1 is fine and the rev 2 sulks...
I've got as far as running Gembench with it a few times (slow results as the firmware wants tweaking as you know)
If it ain't broke, test it to Destruction.
Re: TF536 Rev 2 Design Complete (all gone)
Managed to burn the latest EmuTos to rom and it boots to desktop fine with that.
I'm using one of exxos's ide boards as the rom decocder tho, so not tested the ide interfaceon
Edit:
won't run Gembench though as I get kernel errors etc and of course this IDE board is probably confusing the hell out of it.
I'm using one of exxos's ide boards as the rom decocder tho, so not tested the ide interfaceon
Edit:
won't run Gembench though as I get kernel errors etc and of course this IDE board is probably confusing the hell out of it.
If it ain't broke, test it to Destruction.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
I'm struggling to get this ST to work at all to be fair... :/PhilC wrote: ↑Sat May 09, 2020 3:56 pm Managed to burn the latest EmuTos to rom and it boots to desktop fine with that.
I'm using one of exxos's ide boards as the rom decocder tho, so not tested the ide interfaceon
Edit:
won't run Gembench though as I get kernel errors etc and of course this IDE board is probably confusing the hell out of it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
I'll try and plug it into an original ST and see how it goesterriblefire wrote: ↑Sat May 09, 2020 4:34 pm
I'm struggling to get this ST to work at all to be fair... :/
If it ain't broke, test it to Destruction.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
I've got an ST firmware if you want to test it
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."