They havent driven over it with a tank yet.. and tanks are a limited at the moment with the lockdown.8 Bit Dreams wrote: ↑Fri Apr 17, 2020 7:55 pm mine isn't here yet, but it's normal for Deutsche Post
TF536 Rev 2 Design Complete (all gone)
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
Same here due to lockdown needs 1 month for eu packets.
Just a question ,to build the buffered design i need to remove all rns?
Just a question ,to build the buffered design i need to remove all rns?
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF536 Rev 2 Design Complete (all gone)
Not all of them, just these on the underside the buffer chips..
Retro computer hardware & repair in Germany
Re: TF536 Rev 2 Design Complete (all gone)
i think order is ok 10 kohm network connector no available on mouser .whats next my friends
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
The CPLD is a XC95288XL. Not a 144.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
Tried to xhange order
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
TBH i'd cancel your order and wail until PhilC or another builder completes their build and makes a BOM report. Otherwise you'll end up making 2-3 orders. At this stage its not an exact science. You need to have the parts in to swap RNs etc. This is why i tend to keep the beta testing tight.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
I have parys to change rns and passive but cplds to have 2 or 3 spare is expensive .china parts costs 1/10 but its no good quality
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
Welcome to my world.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
I just need to put the pin headers on mine and then it's finished but no Atari/Amiga time till later today.
If it ain't broke, test it to Destruction.