TF536 Rev 2 Design Complete (all gone)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 2475
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Rev 2 Design Complete

Post by terriblefire » Fri Mar 20, 2020 5:50 pm

Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
———
I get cranky when asked to repeat myself.

mattymuc
Posts: 12
Joined: Thu Jan 02, 2020 11:40 am

Re: TF536 Rev 2 Design Complete

Post by mattymuc » Fri Mar 20, 2020 6:11 pm

Oh that looks like a terrible great Rev 2! Please add me to the list.

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 550
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Rev 2 Design Complete

Post by 8 Bit Dreams » Fri Mar 20, 2020 6:14 pm

terriblefire wrote:
Fri Mar 20, 2020 5:50 pm
Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
i have no doubt it will :!:
i'll go for 20 as soon as orders are open :P

Ps
maybe it is worth to send one board to @agranlund
he wanted to start to work on Atari ST firmware :arrow: :arrow: :arrow:
So TF536 will work on Atari's at the moment it will be released...just my thoughts
Retro computer repair & hardware in Germany

arananet
Posts: 14
Joined: Thu Nov 29, 2018 2:00 pm

Re: TF536 Rev 2 Design Complete

Post by arananet » Fri Mar 20, 2020 7:10 pm

Please addme for one TF536.

Thanks!

Danoo
Posts: 47
Joined: Wed Jan 29, 2020 1:25 pm
Location: Queensland, Australia

Re: TF536 Rev 2 Design Complete

Post by Danoo » Fri Mar 20, 2020 11:16 pm

terriblefire wrote:
Fri Mar 20, 2020 5:50 pm
Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
Will definitely like to purchase at least two, when you get to the bulk purchase, will be patiently watching

terriblefire
Moderator Team
Moderator Team
Posts: 2475
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Rev 2 Design Complete

Post by terriblefire » Sat Mar 21, 2020 11:17 pm

Seem to have missed 2 RNs off the assembly...
Screenshot 2020-03-21 at 23.18.20.png
Screenshot 2020-03-21 at 23.18.20.png (865.35 KiB) Viewed 415 times
———
I get cranky when asked to repeat myself.

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 550
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Rev 2 Design Complete

Post by 8 Bit Dreams » Sun Mar 22, 2020 7:52 am

Ah, i see, RN2 & RN3 are not populated
thats ok, i like these small badgers 😀
Retro computer repair & hardware in Germany

User avatar
kulamario
Posts: 86
Joined: Fri Nov 29, 2019 7:20 pm

Re: TF536 Rev 2 Design Complete

Post by kulamario » Sun Mar 22, 2020 8:13 am

Please add me to list 1xPCB

amimjf
Posts: 8
Joined: Sun Mar 22, 2020 8:25 am

Re: TF536 Rev 2 Design Complete

Post by amimjf » Sun Mar 22, 2020 8:34 am

Hi All,

Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.

I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.

regards.

terriblefire
Moderator Team
Moderator Team
Posts: 2475
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Rev 2 Design Complete

Post by terriblefire » Sun Mar 22, 2020 8:40 am

amimjf wrote:
Sun Mar 22, 2020 8:34 am
Hi All,

Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.

I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.

regards.
BOMs will be available on github once the beta test phase is complete. Its subject to change until then.

Also... you dont need a full BOM anymore. The boards will come with all passives on already.
———
I get cranky when asked to repeat myself.

Post Reply

Return to “TF536”