Re: TF536 Rev 2 Design Complete
Posted: Fri Mar 20, 2020 5:50 pm
Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
exxos's Atari, Amiga & retro forum
We welcome retro users & hardware gurus alike! Come and join the party :)
https://www.exxosforum.co.uk/forum/
TF536 Rev 2 Design Complete (all gone)
https://www.exxosforum.co.uk/forum/viewtopic.php?f=76&t=2600
Page 2 of 23
Re: TF536 Rev 2 Design Complete
Posted: Fri Mar 20, 2020 6:11 pm
Oh that looks like a terrible great Rev 2! Please add me to the list.
Re: TF536 Rev 2 Design Complete
Posted: Fri Mar 20, 2020 6:14 pm
i have no doubt it willterriblefire wrote: ↑Fri Mar 20, 2020 5:50 pm Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
i'll go for 20 as soon as orders are open
Ps
maybe it is worth to send one board to @agranlund
he wanted to start to work on Atari ST firmware
So TF536 will work on Atari's at the moment it will be released...just my thoughts
Re: TF536 Rev 2 Design Complete
Posted: Fri Mar 20, 2020 7:10 pm
Please addme for one TF536.
Thanks!
Thanks!
Re: TF536 Rev 2 Design Complete
Posted: Fri Mar 20, 2020 11:16 pm
Will definitely like to purchase at least two, when you get to the bulk purchase, will be patiently watchingterriblefire wrote: ↑Fri Mar 20, 2020 5:50 pm Well if it works I’ll be ordering 50 immediately. Keeping it tight for this run given how many changes
Re: TF536 Rev 2 Design Complete
Posted: Sat Mar 21, 2020 11:17 pm
Seem to have missed 2 RNs off the assembly...
- Screenshot 2020-03-21 at 23.18.20.png (865.35 KiB) Viewed 3690 times
Re: TF536 Rev 2 Design Complete
Posted: Sun Mar 22, 2020 7:52 am
Ah, i see, RN2 & RN3 are not populated
thats ok, i like these small badgers
thats ok, i like these small badgers
Re: TF536 Rev 2 Design Complete
Posted: Sun Mar 22, 2020 8:13 am
Please add me to list 1xPCB
Re: TF536 Rev 2 Design Complete
Posted: Sun Mar 22, 2020 8:34 am
Hi All,
Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.
I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.
regards.
Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.
I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.
regards.
Re: TF536 Rev 2 Design Complete
Posted: Sun Mar 22, 2020 8:40 am
BOMs will be available on github once the beta test phase is complete. Its subject to change until then.amimjf wrote: ↑Sun Mar 22, 2020 8:34 am Hi All,
Been lurking on the TF forms for a while, I think I will take the plunge and build some 536 r2's for my A500++ boards,.. excellent work and collaboration by you all BTW.
I was looking for a pinned message with a BOM so I could start to source parts ?.. The 536 seems achievable with quite a few 68030's from China, but getting 68060's for 360/560/1260 designs sounds like plain luck.
regards.
Also... you dont need a full BOM anymore. The boards will come with all passives on already.