TF536 Bulk Order (Batch 1 Shipped)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

Ok guys.. Please dont take offence but i am going to delete all the requests post the closure of the batch. There will be another batch but it will be after a small TF360 run.

In terms of the allocation of with/without passives...

There are 89 with passives (board house said they had one board that didnt make the cut) and 60 without passives available.

8 Bit Dreams is taking 20 without passives so that leaves 89 + 40 from the original run.

Are there volunteers who would prefer blanks? Otherwise i'll allocate a 2 and 1 policy and adjust the price. If you ordered a single you'll get with passives unless you specify otherwise.

Dont ask about the spares. They are there to cover losses in the post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by go0se »

I'll take 9 blanks and one with passives for comparison if that's ok?... just to see what I'm missing :)
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Bulk Order (Batch 1 Closed)

Post by 8 Bit Dreams »

:goodpost: Thank You for update :goodpost:

PS
Would like to take part in TF360 testing too, if possible ☺
Retro computer hardware & repair in Germany
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

go0se wrote: Wed May 20, 2020 9:35 am I'll take 9 blanks and one with passives for comparison if that's ok?... just to see what I'm missing :)
Perfect. So thats 31 blanks to allocate out.. any takers?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by PhilC »

@terriblefire 3 of each is fine by me, so I can build up the 3 I need quickly, others I can take my time with etc.

BTW, you had mentioned in another thread about possibly only needing a 144 instead of the 288s for the ST version. Just wondered if you thought that might be the case as I've got a couple of 144s left as well.
If it ain't broke, test it to Destruction.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

PhilC wrote: Wed May 20, 2020 2:17 pm @terriblefire 3 of each is fine by me, so I can build up the 3 I need quickly, others I can take my time with etc.

BTW, you had mentioned in another thread about possibly only needing a 144 instead of the 288s for the ST version. Just wondered if you thought that might be the case as I've got a couple of 144s left as well.
The current ST firmware will fit in the 144. However I wanted to look at doing an ST man in the middle attack on whatever tells the Atari there is an interrupt pending from the IDE Drive. That will need 288.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by PhilC »

Cool, makes sense to me. thanks.
If it ain't broke, test it to Destruction.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

So 31 bare pcbs allocated. Another 20 to go.

Any takers?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
LADmachining
Posts: 41
Joined: Sun Mar 24, 2019 2:19 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by LADmachining »

terriblefire wrote: Wed May 20, 2020 4:37 pm So 31 bare pcbs allocated. Another 20 to go.

Any takers?
I was last in the queue, so don't mind what I get. Whatever is left...
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Bulk Order (Batch 1 Closed)

Post by 8 Bit Dreams »

Will be happy to take more than 20 that ive preordered ;)
Retro computer hardware & repair in Germany
Post Reply

Return to “TF536”