TF536 Bulk Order (Batch 1 Closed)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Mandi
Posts: 22
Joined: Wed Apr 17, 2019 11:14 am

Re: TF536 Bulk Order (Batch 1 Closed)

Post by Mandi » Mon May 18, 2020 5:22 pm

terriblefire wrote:
Mon May 18, 2020 3:35 pm
Expect a PM asking for payment.
I'll be more than happy paying to you for your good work :-)

Mario_PL
Posts: 1
Joined: Sun May 17, 2020 2:26 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by Mario_PL » Mon May 18, 2020 6:26 pm

Ok, then I'm waiting for info.

terriblefire
Moderator Team
Moderator Team
Posts: 2466
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire » Wed May 20, 2020 9:06 am

Ok guys.. Please dont take offence but i am going to delete all the requests post the closure of the batch. There will be another batch but it will be after a small TF360 run.

In terms of the allocation of with/without passives...

There are 89 with passives (board house said they had one board that didnt make the cut) and 60 without passives available.

8 Bit Dreams is taking 20 without passives so that leaves 89 + 40 from the original run.

Are there volunteers who would prefer blanks? Otherwise i'll allocate a 2 and 1 policy and adjust the price. If you ordered a single you'll get with passives unless you specify otherwise.

Dont ask about the spares. They are there to cover losses in the post.
———
I get cranky when asked to repeat myself.

go0se
Posts: 167
Joined: Sun Nov 25, 2018 7:55 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by go0se » Wed May 20, 2020 9:35 am

I'll take 9 blanks and one with passives for comparison if that's ok?... just to see what I'm missing :)

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 549
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Bulk Order (Batch 1 Closed)

Post by 8 Bit Dreams » Wed May 20, 2020 12:24 pm

:goodpost: Thank You for update :goodpost:

PS
Would like to take part in TF360 testing too, if possible ☺
Retro computer repair & hardware in Germany

terriblefire
Moderator Team
Moderator Team
Posts: 2466
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire » Wed May 20, 2020 2:02 pm

go0se wrote:
Wed May 20, 2020 9:35 am
I'll take 9 blanks and one with passives for comparison if that's ok?... just to see what I'm missing :)
Perfect. So thats 31 blanks to allocate out.. any takers?
———
I get cranky when asked to repeat myself.

User avatar
PhilC
Moderator
Moderator
Posts: 2912
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by PhilC » Wed May 20, 2020 2:17 pm

@terriblefire 3 of each is fine by me, so I can build up the 3 I need quickly, others I can take my time with etc.

BTW, you had mentioned in another thread about possibly only needing a 144 instead of the 288s for the ST version. Just wondered if you thought that might be the case as I've got a couple of 144s left as well.
If it ain't broke, test it to Destruction.

terriblefire
Moderator Team
Moderator Team
Posts: 2466
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire » Wed May 20, 2020 2:44 pm

PhilC wrote:
Wed May 20, 2020 2:17 pm
@terriblefire 3 of each is fine by me, so I can build up the 3 I need quickly, others I can take my time with etc.

BTW, you had mentioned in another thread about possibly only needing a 144 instead of the 288s for the ST version. Just wondered if you thought that might be the case as I've got a couple of 144s left as well.
The current ST firmware will fit in the 144. However I wanted to look at doing an ST man in the middle attack on whatever tells the Atari there is an interrupt pending from the IDE Drive. That will need 288.
———
I get cranky when asked to repeat myself.

User avatar
PhilC
Moderator
Moderator
Posts: 2912
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by PhilC » Wed May 20, 2020 2:51 pm

Cool, makes sense to me. thanks.
If it ain't broke, test it to Destruction.

terriblefire
Moderator Team
Moderator Team
Posts: 2466
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire » Wed May 20, 2020 4:37 pm

So 31 bare pcbs allocated. Another 20 to go.

Any takers?
———
I get cranky when asked to repeat myself.

Post Reply

Return to “TF536”