Hi all
Thought i would pop in and say How pleased i am with my upgrade from a TF534...to a TF536(bought on Amibay)..in my A500+...OMG how much fast ram lol.....Working so nice...Installed MMU library`s and are using Fastrom.....Credit to Steve for the hard work yet again.....I just hope It will play nice with my zz9000 and Rob Cranley`s Z-500.
I even had Doom running lol
Any "hints and tips" would be nice just incase i have missed anything....!
Once again....Steve...you sir are a Legand....I salute you
Kind Regards
Mark
Wow Just upgraded from a TF534 to a 536
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 57
- Joined: Sat Nov 09, 2019 10:19 pm
Wow Just upgraded from a TF534 to a 536
A500+ Pistorm EMU68... A600 Furia 020/33....A1200 TF1230
Re: Wow Just upgraded from a TF534 to a 536
Similar plans, ZZ9000 in dispatch from MNT. Should be fine as they have tested with Zorro II systems. But fingers crossed.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Wow Just upgraded from a TF534 to a 536
NIce thanks. Rob lives a mile from me too
Really this is what its about for me... its about something everyone can enjoy.. ENJOY!
Really this is what its about for me... its about something everyone can enjoy.. ENJOY!
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Wow Just upgraded from a TF534 to a 536
I was gathering info on the use of the TF536 and the ZZ9000 and stumbled into this thread.
FYI ....
I picked up a TF536 yesterday from alenppc.
I installed it last night. System (A2000) works fine.
I installed the ZZ9000 today. It's a no go.
I have both an ecs v2 and a megachip. I removed both. Still nothing - the Amiga hangs as soon as an RTG mode is selected.
Note: I had no issues with the TF534.
Next option... Upgrade the firmware to 1.6.x (I was using 1.5.1. This time, the ZZ switches to the RTG mode then hangs
(a bit better but we're still under water
I have informed Lukas. I'm sure he'll fix it. I also initially had issues with the TF534.
FYI ....
I picked up a TF536 yesterday from alenppc.
I installed it last night. System (A2000) works fine.
I installed the ZZ9000 today. It's a no go.
I have both an ecs v2 and a megachip. I removed both. Still nothing - the Amiga hangs as soon as an RTG mode is selected.
Note: I had no issues with the TF534.
Next option... Upgrade the firmware to 1.6.x (I was using 1.5.1. This time, the ZZ switches to the RTG mode then hangs
(a bit better but we're still under water
I have informed Lukas. I'm sure he'll fix it. I also initially had issues with the TF534.
Re: Wow Just upgraded from a TF534 to a 536
@ProfPlum
Hi. I'm thinking of buying a ZZ9000 for my a500 with a checkmate zorro board. Just out of interest how was the RTG performance when it was working on TF534.
Thanks
Hi. I'm thinking of buying a ZZ9000 for my a500 with a checkmate zorro board. Just out of interest how was the RTG performance when it was working on TF534.
Thanks
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Wow Just upgraded from a TF534 to a 536
TF536 rev.2 is not working on A2k atm..
https://www.exxosforum.co.uk/forum/viewt ... 084#p44263
So this isn't ZZ9000 this time,
Sorry
https://www.exxosforum.co.uk/forum/viewt ... 084#p44263
So this isn't ZZ9000 this time,
Sorry
Retro computer hardware & repair in Germany
-
- Posts: 57
- Joined: Sat Nov 09, 2019 10:19 pm
Re: Wow Just upgraded from a TF534 to a 536
Yes mate I`ve seen that thread.....I still have my TF534.......I`m hoping theres a fix for this TF issue at some point....you see the P96 software needs a 020 minimum to run the zz9000......ProfPlum wrote: ↑Sun Jul 12, 2020 11:10 pm I was gathering info on the use of the TF536 and the ZZ9000 and stumbled into this thread.
FYI ....
I picked up a TF536 yesterday from alenppc.
I installed it last night. System (A2000) works fine.
I installed the ZZ9000 today. It's a no go.
I have both an ecs v2 and a megachip. I removed both. Still nothing - the Amiga hangs as soon as an RTG mode is selected.
Note: I had no issues with the TF534.
Next option... Upgrade the firmware to 1.6.x (I was using 1.5.1. This time, the ZZ switches to the RTG mode then hangs
(a bit better but we're still under water
I have informed Lukas. I'm sure he'll fix it. I also initially had issues with the TF534.
I dont know what other card i could use tbh.
A500+ Pistorm EMU68... A600 Furia 020/33....A1200 TF1230