NEW BOM
Moderators: terriblefire, Terriblefire Moderator
- GadgetUK164
- Posts: 430
- Joined: Fri Jan 04, 2019 2:26 pm
NEW BOM
Does anyone know where the BOM is for these? I am now able to order the parts up but not sure precisely what I need to order!
My YouTube Channel - www.youtube.com/GadgetUK164
Re: TF536 Bulk Order Batch 4 (exxos run)
https://www.exxosforum.co.uk/forum/viewt ... 728#p38246GadgetUK164 wrote: ↑Wed Jul 01, 2020 3:34 pm Does anyone know where the BOM is for these? I am now able to order the parts up but not sure precisely what I need to order!
-
- Posts: 41
- Joined: Sun Mar 24, 2019 2:19 pm
Re: TF536 Bulk Order Batch 4 (exxos run)
I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.
https://docs.google.com/spreadsheets/d/ ... 2098118341
Anthony
https://docs.google.com/spreadsheets/d/ ... 2098118341
Anthony
- GadgetUK164
- Posts: 430
- Joined: Fri Jan 04, 2019 2:26 pm
Re: TF536 Bulk Order Batch 4 (exxos run)
Thanks =D!!!!! And goose too!LADmachining wrote: ↑Wed Jul 01, 2020 4:43 pm I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.
https://docs.google.com/spreadsheets/d/ ... 2098118341
Anthony
EDIT: Parts ordered - good grief that was expensive lol! I found it cheaper to order from Digikey as you can order smaller quantities. RS have large packs of everything...
My YouTube Channel - www.youtube.com/GadgetUK164
Re: TF536 Bulk Order Batch 4 (exxos run)
On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.LADmachining wrote: ↑Wed Jul 01, 2020 4:43 pm I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.
https://docs.google.com/spreadsheets/d/ ... 2098118341
Anthony
W9825G6KH-6-ND seems to be the cheapest memory on Digikey.
Re: TF536 Bulk Order Batch 4 (exxos run)
Wow that RAM is super cheap. Do we know if it actually works with this board?
Re: TF536 Bulk Order Batch 4 (exxos run)
I have quite a few of these, I will have a go now and report back.
Edit:
Diagrom sees and tests them fine, but wont boot OS from IDE at all.
Tried running a memtest from floppy and no joy.
I have -7 not the -6 Above.
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF536 Bulk Order Batch 4 (exxos run)
already tried - this ram type isn't working
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Bulk Order Batch 4 (exxos run)
Next time i actually build a board i'll try some of this stuff. Might be a while
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Bulk Order Batch 4 (exxos run)
I've been trying 16m x 16 chips and will try a 32m x 16 chips this week.
I presume a 1m x 8 would be wrong format?
I presume a 1m x 8 would be wrong format?
If it ain't broke, test it to Destruction.