TF536 with ZZ9000 video card

[Danoo]

Hi all,
Thinking about ordering a ZZ9000 video card for my A2000 (Rev 6.2). My A2000 has a TF536 (Aug 2020 firmware) installed using a Matze's co-processor adapter board (thank you Matze), working extremely well. (TF536 thank you Stephen)

Just wondering before I order, is the discuss above only concerning a A500 with a ZZ9000
Does anyone have an A2000 with a TF536 installed working with a ZZ9000

[alenppc]

Well Lukas tested it on the A2000. I don’t know of anyone who is running it on the A500, so actually the fw update may not even be necessary but someone has to try.

[Danoo]

Well Lukas tested it on the A2000. I don’t know of anyone who is running it on the A500, so actually the fw update may not even be necessary but someone has to try.

Thanks for the reply, I re-read the thread, how did I skip over that it was tested on a A2000 in post 10 , I will blame age, you see it but it does not compute

[amimjf]

I am 'trying' to run it with an A500+, but its a bit unstable, card not detected sometimes, lockups when switching to P96 modes.

Using 1.7.3 beta firmware for A500+, 1.6 Amiga drivers.

[amimjf]

Success (with an A2000),.. 1080p / 8bit

ZZ9000 with 1.7.3 beta firmware / Drivers 1.6
A2000 6.2 motherboard
TF536 with 2nd-Aug firmware
KS 3.1.4

So its all possible,.. same cards pulled an put in an A500+ not currently working.

[Mark Sealey]

looks awesome....Im not even sure if my TF536 Has a Jtag header tbh lol i never looked.....my ZZ9000 should ship in a few weeks for my A500+ if im right there is a firmware for the A500 and one for the A500+

I have a TF534 too so can try that at some point

[amimjf]

if im right there is a firmware for the A500 and one for the A500+

Correct, didn't actually work for me though in my A500++ (the remake board), with Rob Cranley's Zorro adapter, hence trying it in A2000.

[peo]

Without an updated firmware your TF536 will not work on an A2000.

So, is this the firmware that should be used (for A2000 + TF536) ?

tf536-binaries-as-of-oct-30-2020.PNG (151.41 KiB) Viewed 3390 times

[terriblefire]

Without an updated firmware your TF536 will not work on an A2000.

So, is this the firmware that should be used (for A2000 + TF536) ?
tf536-binaries-as-of-oct-30-2020.PNG

No see the A2000 TF536 thread.

[Mark Sealey]

Hi all....I`ve been reading The A2000/TF536....and recapped on this tread...any updates ? My zz9000 will be here at some point Batch 5.

My Z-500 and A500+ is waiting lol.....