Hi,
is it possible to run the CPU on the TF536 with 40MHz, means just replacing the Oscillator?
TF536 with 40MHz CPU
Moderators: terriblefire, Terriblefire Moderator
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TF536 with 40MHz CPU
Firmware is fixed for 50mhz, so it most likely will not work.
You need to source 030 which will handle 50mhz better, if your cpu is unstable at this speed.
You need to source 030 which will handle 50mhz better, if your cpu is unstable at this speed.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 with 40MHz CPU
All bets are off if you move away from 50mhz. The logic and timing are fixed at this frequency.ninjafahrer wrote: ↑Wed Dec 30, 2020 9:44 pm Hi,
is it possible to run the CPU on the TF536 with 40MHz, means just replacing the Oscillator?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 with 40MHz CPU
I tried it but I would not recommend it. It only works with certain A500 motherboards (I think this only worked on a rev5 but not other revs), and there may be other side effects.ninjafahrer wrote: ↑Wed Dec 30, 2020 9:44 pm Hi,
is it possible to run the CPU on the TF536 with 40MHz, means just replacing the Oscillator?