TF536 Firmare Update RC3
Moderators: terriblefire, Terriblefire Moderator
Re: TF536 Firmare Update RC3
@Seb132 which side of the country are you on?
Re: TF536 Firmare Update RC3
Thank you!
I tested the new FW and the lockups during serial transfers are gone.
I tested the new FW and the lockups during serial transfers are gone.
- GadgetUK164
- Posts: 430
- Joined: Fri Jan 04, 2019 2:26 pm
Re: TF536 Firmare Update RC3
Got around to updating my 536 today! This version works perfectly =D No problems with the A2091, or the GottaGoFastRAM board too. All working fine! Great job Stephen!
My YouTube Channel - www.youtube.com/GadgetUK164
Re: TF536 Firmare Update RC3
Thanks so much Stephen. You'da man!!
All my best,
weav
All my best,
weav
Re: TF536 Firmare Update RC3
How about the A570 CDrom ? Does it work with TF536 ?GadgetUK164 wrote: ↑Tue Apr 06, 2021 11:45 pm Got around to updating my 536 today! This version works perfectly =D No problems with the A2091, or the GottaGoFastRAM board too. All working fine! Great job Stephen!
- GadgetUK164
- Posts: 430
- Joined: Fri Jan 04, 2019 2:26 pm
Re: TF536 Firmare Update RC3
I would imagine the A570 suffers the same problem the CDTV does where the memory allocation stuff is hard coded into the ROM - guessing it wont work without a mod to the ROM?
My YouTube Channel - www.youtube.com/GadgetUK164
Re: TF536 Firmare Update RC3
Or being able to cripple fast RAM to 8MB?
Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Firmare Update RC3
That cannot be done on the 536. It does not use the ZII area at all by design.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."