Starting to build my TF536
Moderators: terriblefire, Terriblefire Moderator
Re: Starting to build my TF536
Oh no, I thought I was the only idiot to install the RAM backwards! At least you have good equipment to fix that.
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
So it’s all finished and kind of working but it’s not right, takes about 15 seconds to boot, lots of artifacts and populous 2 plays about 100 times faster than normal
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
EDIT
First video didn’t work so I uploaded it to YouTube
https://youtube.com/shorts/tmg_q1PLyg8?feature=share
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
I’ve just removed the RAM and it’s still the same.
Any suggestions?
CPU?
Any suggestions?
CPU?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Starting to build my TF536
I’ve never seen anything like that and the machine still booting
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Starting to build my TF536
Is it possible it's a chip ram fault? just looking at the display corruption but with it still booting.
If it ain't broke, test it to Destruction.
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
It works fine with the original cpu. I’m going to pull one of my other Amigas out and try it
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
Does this in one of my others
-
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
Boots diagrom fine with no artifacts