Starting to build my TF536

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Aeberbach
Posts: 149
Joined: Mon Dec 16, 2019 10:24 pm

Re: Starting to build my TF536

Post by Aeberbach »

Oh no, I thought I was the only idiot to install the RAM backwards! At least you have good equipment to fix that.
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

Aeberbach wrote: Fri Apr 16, 2021 12:18 am Oh no, I thought I was the only idiot to install the RAM backwards! At least you have good equipment to fix that.
Now there are 2 idiots 😆
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

So it’s all finished and kind of working but it’s not right, takes about 15 seconds to boot, lots of artifacts and populous 2 plays about 100 times faster than normal
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

F07D2884-7ADF-4AD5-B291-280A02819F50.jpeg
F07D2884-7ADF-4AD5-B291-280A02819F50.jpeg (603.01 KiB) Viewed 3282 times
B4ADACE3-FC3F-40C3-AD2B-0D93A187BCD5.jpeg
B4ADACE3-FC3F-40C3-AD2B-0D93A187BCD5.jpeg (540.51 KiB) Viewed 3282 times
35F3D988-4771-448E-9CB9-AF3F5730DAF9.jpeg
35F3D988-4771-448E-9CB9-AF3F5730DAF9.jpeg (586.18 KiB) Viewed 3282 times
B8AC4DCF-B446-4170-9020-B502405528CB.jpeg
B8AC4DCF-B446-4170-9020-B502405528CB.jpeg (807.16 KiB) Viewed 3282 times

EDIT
First video didn’t work so I uploaded it to YouTube

https://youtube.com/shorts/tmg_q1PLyg8?feature=share
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

I’ve just removed the RAM and it’s still the same.

Any suggestions?
CPU?
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Starting to build my TF536

Post by terriblefire »

I’ve never seen anything like that and the machine still booting
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: Starting to build my TF536

Post by PhilC »

Is it possible it's a chip ram fault? just looking at the display corruption but with it still booting.
If it ain't broke, test it to Destruction.
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

It works fine with the original cpu. I’m going to pull one of my other Amigas out and try it
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

Does this in one of my others

CF114723-22A1-4182-B134-5C4BD751F46E.jpeg
CF114723-22A1-4182-B134-5C4BD751F46E.jpeg (601.97 KiB) Viewed 3205 times
Avinitlarge
Posts: 51
Joined: Fri Apr 09, 2021 11:15 pm
Location: Rotherham
Contact:

Re: Starting to build my TF536

Post by Avinitlarge »

Boots diagrom fine with no artifacts
Post Reply

Return to “TF536”