Hi all
I've been getting parts for numerous builds the last few days but a few have thrown me either because they're not in stock or simply can't find them, I'm after parts for the tf536 board I bought here recently
I'm struggling to source these two
MT48LC16M16A2P-6A:G TR
SIT8008BC-83-33E-100.000000T
I've done my very best to try source parts from the same due to the crazy shipping prices but I think I've found the parts at digikey. Can someone please confirm these would work find
https://www.digikey.co.uk/en/products/d ... -G/4315922
https://www.digikey.co.uk/en/products/d ... =375808380
If anyone has any parts spate for sale for a tf536, gottagofastram board, pistorm or a ide68k I'd definitely be interested.
Thanks for the help
Building a TF536 for my amiga 500+, parts query
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 18
- Joined: Mon Sep 06, 2021 12:33 am
Re: Building a TF536 for my amiga 500+, parts query
should be ok
-
- Posts: 18
- Joined: Mon Sep 06, 2021 12:33 am
Re: Building a TF536 for my amiga 500+, parts query
Excellent thanks
I'll go ahead and order them
I'll go ahead and order them
-
- Posts: 18
- Joined: Mon Sep 06, 2021 12:33 am
Re: Building a TF536 for my amiga 500+, parts query
My luck, ordered but is on back order so no good
How about these?
https://uk.farnell.com/micron/mt48lc16m ... 16A2P-6A:G
For the part below I can't find them in stock anywhere
SIT8008BC-83-33E-100.000000T
Anyone have any suggestions?
Thanks all
How about these?
https://uk.farnell.com/micron/mt48lc16m ... 16A2P-6A:G
For the part below I can't find them in stock anywhere
SIT8008BC-83-33E-100.000000T
Anyone have any suggestions?
Thanks all
Re: Building a TF536 for my amiga 500+, parts query
Trippy I have emailed you
-
- Posts: 18
- Joined: Mon Sep 06, 2021 12:33 am
Re: Building a TF536 for my amiga 500+, parts query
Got all the parts I need but all I need are
2 x 64 pin dip sockets
Can anyone help?
Thanks to supaduper for all his help
2 x 64 pin dip sockets
Can anyone help?
Thanks to supaduper for all his help
Re: Building a TF536 for my amiga 500+, parts query
Perchance https://www.exxosforum.co.uk/atari/store2/#0038 ?Trippy1986 wrote: ↑Thu Sep 23, 2021 3:08 pm Got all the parts I need but all I need are
2 x 64 pin dip sockets
Can anyone help?
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Building a TF536 for my amiga 500+, parts query
The TF536 doesnt need a 64 pin dip socket. If you install one the pins will not connect with the A500. You need turned pinstrip.Trippy1986 wrote: ↑Thu Sep 23, 2021 3:08 pm Got all the parts I need but all I need are
2 x 64 pin dip sockets
Can anyone help?
Thanks to supaduper for all his help
e.g. https://www.exxosforum.co.uk/atari/store2/#0132
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Posts: 18
- Joined: Mon Sep 06, 2021 12:33 am
Re: Building a TF536 for my amiga 500+, parts query
In that case I have everything I need.
Thanks all
Thanks all